Brad, We have used TeleView 2000 for the past several years. We have used it on multiple occasions with multi-badges during diving operations. TeleView only had limited security access rights so you have to use the Manager level for the manual addition of workers when HIS-20 would go down, network issues, or when using it not connected to the network. While normal access control entries get the information automatically to TeleView from our access control system, multi-badge entries do not and have to be manually entered. So yes we use both options at the same time.
You are right about the vulnerability. We are in the process of switching over to GEDDS but currently use both systems in parallel. Chuck Creamer Charles E. Creamer Health Physicist Tennessee Valley Authority Browns Ferry Nuclear Plant P.O. Box 2000 (Mail Stop NAB-1G-BFN) Decatur, Al. 35609-2000 Phone: 256-729-2983 Fax: 256-729-3101 Pager: 1-800-323-4853, pin 30-053 mailto:[email protected] This electronic message transmission contains information which may be TVA SENSITIVE, TVA RESTRICTED or TVA CONFIDENTIAL. Any misuse or unauthorized disclosure can result in both civil and criminal penalties. If you are not the intended recipient, be aware that any disclosure, copying, distribution or use of the content of this information is prohibited. If you have received this communication in error, please notify me immediately by email and delete the original message. From: [email protected] [mailto:[email protected]] On Behalf Of Bradley A Krupp Sent: Wednesday, September 25, 2013 8:03 AM To: [email protected] Cc: James P Stewart Subject: Powernet: TeleView 2000 Fermi currently uses TeleView 2000 for its telemetry software. Normally this is in a network configuration with a link to our access control system. With manager level user access an individual could also add individuals to the Worker Roster manually. This level of access would also allow them access to all sorts of other settings that could really mess up proper functioning of the system if inadvertently changed. Additionally, using both options causes, in my opinion, a high risk of the same ED being assigned to two different individuals if the appropriate level of diligence is not used to delete the manual entry when done. My questions are as follows: Do you allow both options to be used at the same time? Do you use TeleView 2000 when multibadging individuals? If you don't use TeleView 2000 when multibadging individuals, what software do you use? Thanks in advance for your assistance. Brad Krupp
