Pad lock and key with hasp or drilled hole in flange area for installation. Then a chain and pad lock for multiple vacuums to prevent inadvertent vacuum inventory removal.
Yours
Kevin Sadowsky
Radiation Protection Division
San Onofre Nuclear Generation Station
949.368.6695
[email protected]
From: "STECKELBERG, TIMOTHY R" <[email protected]>
To: "[email protected]" <[email protected]>,
Date: 04/02/2014 08:01 AM
Subject: Powernet: Hepa vacuum controls
Sent by: [email protected]
Fort Calhoun Station is interested in how you control inadvertent opening of Hepa vacuums?
What type of tamper seal do you use? (i.e. Wire crimp, strap and lock, lock?) And how is it installed?
Thanks in advance for your responses:
Tim Steckelberg
This e-mail contains Omaha Public Power District's confidential and proprietary information and is for use only by the intended recipient. Unless explicitly stated otherwise, this e-mail is not a contract offer, amendment, or acceptance. If you are not the intended recipient you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited.
----------------------------------- Powernet - a service of the Health Physics Society Power Reactor Section Powernet archives at http://www.mail- archive.com/[email protected]/ Reply to: [email protected] If Questions, contact Mike Russell, CHP at [email protected]
