Surry Power Station response follows: 1. No, we use a metal diaper pin approximately 3" in size.
2. We just use the pin and attach to the belt or through scrubs. 3. Key is attached to the pin through the eyelet of the pin via a large metal key ring. Hope this helps. Erik Erik Simon Health Physics Shift Supervisor Radiation Protection, Surry Power Station Dominion Generation Phone: 757-365-2672; Internal: 8-798-2672 Pager: 800-272-5643-3299; E-mail: [email protected]<mailto:[email protected]> From: [email protected] [mailto:[email protected]] On Behalf Of Parlatore, Linda M:(GenCo-Nuc) Sent: Friday, August 01, 2014 2:48 PM To: [email protected] Cc: Bruno, Joseph:(GenCo-Nuc) Subject: Powernet: Request for Key Control Information Limerick experienced a lost HRA key recently. A technician signed out multiple keys to support multiple LHR entries. When he returned it was discovered that one key was missing. We believe the metal clasp and/or the plastic connector to the metal ring failed. Below is an example of the key configuration at LGS with electric tape added to prevent metal snap failure. [cid:[email protected]] When issuing HRA/LHRA keys, how are the keys physically controlled by the RP Technicians at your site? 1) Are they secured to a lanyard by a clip as pictured above? 2) Are they secured to a belt by some means? 3) Is the key secured using some means through the 'O' ring? 4) If none the above apply, please explain how your technicians secure HRA/LHRA keys to there person? Please forward your responses to Joseph Bruno at: [email protected]<mailto:[email protected]> This e-mail and any attachments are confidential, may contain legal, professional or other privileged information, and are intended solely for the addressee. If you are not the intended recipient, do not use the information in this e-mail in any way, delete this e-mail and notify the sender. -EXCIP CONFIDENTIALITY NOTICE: This electronic message contains information which may be legally confidential and or privileged and does not in any case represent a firm ENERGY COMMODITY bid or offer relating thereto which binds the sender without an additional express written confirmation to that effect. The information is intended solely for the individual or entity named above and access by anyone else is unauthorized. If you are not the intended recipient, any disclosure, copying, distribution, or use of the contents of this information is prohibited and may be unlawful. If you have received this electronic transmission in error, please reply immediately to the sender that you have received the message in error, and delete it. Thank you.
