We do not do post-survey instrument response checks. We response check our instruments daily and if any fall out of tolerance in a non-conservative direction we search for any surveys where that instrument was used. Any suspect areas are then re-surveyed.
[APS_NLOGO_CMYK_Gradient] PHILLIP WALL Sr. Health Physicist, Radiation Protection 5801 S. Wintersburg Rd., Tonopah AZ 85354, M.S. 7397 Tel 623 393 2627 [email protected]<mailto:[email protected]> aps.com<http://www.aps.com/> From: ALBISHARAT Sasha(S) - BRUCE POWER [mailto:[email protected]] Sent: Monday, May 15, 2017 6:43 To: [email protected] Subject: [powernet] Post survey instrument source checks ____________________________________________________ USE CAUTION - EXTERNAL SENDER:([email protected]<mailto:[email protected]>) Do not click on links or open attachments that are not expected. For questions or concerns, please email the APS Cyber Defense Center team at [email protected]<mailto:[email protected]> or contact the APS Helpdesk. ____________________________________________________ Good Morning, I would like to post the question on powernet whether any other utilities perform post survey source checks on rad instruments (i.e. not just pre survey source checks)? Thanks for your help Sasha Albisharat Health Physicist Bruce Power --- NOTICE --- This message is for the designated recipient only and may contain confidential, privileged or proprietary information. If you have received it in error, please notify the sender immediately and delete the original and any copy or printout. Unintended recipients are prohibited from making any other use of this e-mail. Although we have taken reasonable precautions to ensure no viruses are present in this e-mail, we accept no liability for any loss or damage arising from the use of this e-mail or attachments, or for any delay or errors or omissions in the contents which result from e-mail transmission.
