Mark, We have the spectrum of dosimeters in some part of our program.
1. Older smaller population of approx. 350 each Seimens Mk2s are used for Emergency planning 2. We have DMC2000S (and IPAMs) which are used during the outages mainly for multibadging but to supplement are needed. 3. Approximately 40each DMC2000GNs 4. DMC3000 G2 version are the primary population of used because of the benefits ( standard battery, vibration and visual dose/rate alarms as examples) and additional approx. 100 telemetry units 5. Smaller population of < 30each DMC3000 G3 that are attached to the Neutron modules. Allowed for the transition of turnstiles reader change and Access Control software and calibration software changes. Michael Macho Radiation Protection Staff [email protected]<mailto:[email protected]> [cid:[email protected]] SAFETY is first QUALITY SCHEDULE Luminant Power Comanche Peak Nuclear Power Plant 6322 North FM 56 or PO Box 1002 Mail Code 005A Glen Rose, TX 76043 (254)897-5698 /(254)897-8163 (817)559-1997 Cell From: Powernet [mailto:[email protected]] On Behalf Of Kinmark, Michael L. via Powernet Sent: Wednesday, October 31, 2018 1:20 PM To: [email protected] Cc: Kinmark, Michael L. <[email protected]> Subject: [Powernet] Quick Benchmarking on ED's EXTERNAL EMAIL Question from Columbia on Electronic Dosimeter make/model Which ED model are you currently using? DMC-3000?, DMC-2000S?, Or other? Plans to change in the future? Columbia: Currently using DMC-2000S. Tentative plans to change over to 3000 in 2 years. Sincerely, Michael Kinmark HP Staff Advisor III Radiological Support Columbia Generating Station 509-377-2091 [email protected]<mailto:[email protected]>
_______________________________________________ Powernet mailing list [email protected] http://hpspowernet.org/mailman/listinfo/powernet_hpspowernet.org
