PSEG Nuclear does not
[https://www.pseg.com/images/global/email/PSEG_emailsignature_PSEGw-tag_version2.png]<http://www.pseg.com> [http://facebook.com/pseg]<http://www.facebook.com/pseg> [Twitter] <http://www.twitter.com/PSEGnews> [LinkedIn] <http://www.linkedin.com/company/pseg> [https://www.pseg.com/images/global/WP_LOGOgrey.png] <http://energizepseg.com/> PSEGSC From: Powernet [mailto:[email protected]] On Behalf Of Ephraim via Powernet Sent: Wednesday, April 10, 2019 10:39 AM To: [email protected] Cc: Ephraim; Mark Tursa; Jim VanLooven Subject: [EXTERNAL] Re: [Powernet] RP field instrument tamper seals Email sent from outside of PSEG. Use caution before using links/attachments. Ontario Power generation does not Ephraim Schwartz On Apr 9, 2019, at 3:24 PM, Tom Meek via Powernet <[email protected]<mailto:[email protected]>> wrote: I have a question regarding tamper resistant seals for calibration on RP meters. A QA audit made a SFR (supplier finding report) at an instrument calibration facility stating vendor should be placing these seals on our RP meters. The cited standard is ANSI Z540:1994 Section 11.5, but after some discussion we agreed that this only applies to lab standards. He also cited ISO 17025:2017 Section 6.4.12 which states “the laboratory shall take practical measures to prevent unintended adjustments of equipment from invalidating results.” The auditor said that industry interprets this as requiring tamper seals, but also said that complying with the ISO standard was a matter of lab certification only (not a regulatory requirement). Does any site require tamper resistant seals on RP field instruments? Yes No If yes how do you handle routine battery and/or desiccant replacement? What do you do if a seal is found broken or missing. In short, would the event be entered into the corrective action system? Do you rely on your source check and zero check of the instrument to “validate” its calibration in lieu of the tamper seal? Thanks in advance Tom Meek, CHP _______________________________________________ Powernet mailing list [email protected]<mailto:[email protected]> http://hpspowernet.org/mailman/listinfo/powernet_hpspowernet.org<https://urldefense.proofpoint.com/v2/url?u=http-3A__hpspowernet.org_mailman_listinfo_powernet-5Fhpspowernet.org&d=DwMFaQ&c=vQdfm6aj9rMoR8LTeqbMWg&r=R1nMoZX4UFzZxsUZLNQjeG9ZuZLj6fyrUPKHNmHafYQ&m=Fs7cQccqLqTVHPezmfO2hQ11HKQcETX_69iEa119fv8&s=ZOtvZU4klLe5W86DqGwppXnR6N79njgs_jAJfOvtkgE&e=> The information contained in this e-mail, including any attachment(s), is intended solely for use by the named addressee(s). If you are not the intended recipient, or a person designated as responsible for delivering such messages to the intended recipient, you are not authorized to disclose, copy, distribute or retain this message, in whole or in part, without written authorization from PSEG. This e-mail may contain proprietary, confidential or privileged information. If you have received this message in error, please notify the sender immediately. This notice is included in all e-mail messages leaving PSEG. Thank you for your cooperation.
_______________________________________________ Powernet mailing list [email protected] http://hpspowernet.org/mailman/listinfo/powernet_hpspowernet.org
