Quick benchmark request on your calibration frequencies for your count room multichannel analyzers (MCAs). North Anna is looking to change from an annual calibration that includes all counting geometries to a longer period of time between calibrations. We would appreciate any information, lesson learned, or concerns on this change.
1. What is your calibration frequency for your MCAs (annually, every 3 years, every 5 years, etc.)? 2. Have you changed frequency from an annual calibration to a longer period of time? 3. If so, what was your basis for changing the frequency? 4. Has this change been effective? Barbara J. Thompson North Anna Power Station 1022 Haley Drive Mineral, Va 23117 Superintendent Health Physics Technical Services [email protected] Phone: 540-894-2638 CONFIDENTIALITY NOTICE: This electronic message contains information which may be legally confidential and or privileged and does not in any case represent a firm ENERGY COMMODITY bid or offer relating thereto which binds the sender without an additional express written confirmation to that effect. The information is intended solely for the individual or entity named above and access by anyone else is unauthorized. If you are not the intended recipient, any disclosure, copying, distribution, or use of the contents of this information is prohibited and may be unlawful. If you have received this electronic transmission in error, please reply immediately to the sender that you have received the message in error, and delete it. Thank you.
_______________________________________________ Powernet mailing list [email protected] http://hpspowernet.org/mailman/listinfo/powernet_hpspowernet.org
