Hi again, Arch uses a package format called. pkg.tar.gz, and yes I have compiled kpowersave myself, using --prefix=/opt/kde and as you suggested --enable-debug-msg
I then tried running kpowersave from the console using: kpowersave --nofork. Reading from the output it seems that things are working fine, only nothing ever happens after the given amount of inactivity. I have tried waiting several minutes more than the 1 minute I chose to be the trigger. As you suggested, I also tried to enable scheme specific blacklist both with an without programs, still with no success. This is the output I have from kpowersave, notice that at 13:14:40 I choose to explicitly do a "Suspend to Ram" from the kpowersave menu, to see what kind of output that brings. Any suggestions how to debug further? [EMAIL PROTECTED] kpowersave]$ kpowersave --nofork 12:57:04:424: kpowersave::kpowersave 12:57:04:425: pDaemon::pdaemon 12:57:04:425: dbusPowersaveConnection::dbusPowersaveConnection 12:57:04:426: dbusPowersaveConnection::initDBUS 12:57:04:428: pDaemon::checkDaemon 12:57:04:429: pDaemon::switchToDaemonMode 12:57:04:429: pDaemon::readDaemonData 12:57:04:431: pDaemon::updateSchemeInfo 12:57:04:449: pDaemon::updateSchemeInfo 12:57:04:459: pDaemon::getMaxBrightnessLevels 12:57:04:462: kpowersave::update 12:57:04:462: kpowersave::updateCPUFreqMenu 12:57:04:462: kpowersave::updateSchemeMenu 12:57:04:464: kpowersave::setSchemeSettings() 12:57:04:467: kpowersave::setAutoSuspend 12:57:04:492: pDaemon::setBrightness 12:57:04:498: pDaemon::getBrightness 12:57:04:499: kpowersave::redrawPixmap 12:57:04:499: kpowersave::loadIcon 12:57:04:500: kpowersave::drawIcon 12:57:04:528: filter_function::SIGNAL=NameAcquired 12:57:04:528: filter_function::VALUE=:1.117 12:57:23:977: kpowersave::updateTooltip 12:57:27:606: kpowersave::mousePressEvent 12:57:27:673: pDaemon::checkDaemon 12:57:27:676: pDaemon::updateSchemeInfo 12:57:32:791: kpowersave::show_configure_dialog 12:57:32:839: pDaemon::getMaxBrightnessLevels 12:57:32:849: pDaemon::getBrightness 12:57:32:860: pDaemon::setBrightness 12:57:32:871: pDaemon::getBrightness 12:57:32:875: pDaemon::setBrightness 12:57:32:884: pDaemon::getBrightness 12:58:13:828: kpowersave::observe_configDlg 12:58:13:836: kpowersave::setSchemeSettings() 12:58:13:843: kpowersave::setAutoSuspend 12:58:13:865: pDaemon::setBrightness 12:58:13:933: pDaemon::getBrightness 13:03:39:620: kpowersave::updateTooltip 13:03:42:10: kpowersave::mousePressEvent 13:03:42:60: pDaemon::checkDaemon 13:03:42:63: pDaemon::updateSchemeInfo 13:03:50:618: kpowersave::show_configure_dialog 13:03:50:645: pDaemon::getMaxBrightnessLevels 13:03:50:665: pDaemon::getBrightness 13:03:50:686: pDaemon::setBrightness 13:03:50:696: pDaemon::getBrightness 13:03:50:699: pDaemon::setBrightness 13:03:50:709: pDaemon::getBrightness 13:05:10:793: kpowersave::observe_configDlg 13:05:10:800: kpowersave::setSchemeSettings() 13:05:10:807: kpowersave::setAutoSuspend 13:05:10:818: pDaemon::setBrightness 13:05:10:863: pDaemon::getBrightness 13:14:32:979: kpowersave::updateTooltip 13:14:35:780: kpowersave::mousePressEvent 13:14:35:829: pDaemon::checkDaemon 13:14:35:833: pDaemon::updateSchemeInfo 13:14:40:313: kpowersave::do_suspend2ram 13:14:40:409: filter_function::SIGNAL=PowersaveEvent 13:14:40:410: filter_function::VALUE=global.suspend2ram 13:14:40:410: pDaemon::processClientMessage 13:14:40:410: Powersave Event: 'global.suspend2ram' 13:14:40:410: kpowersave::set_suspend_type 13:14:40:410: kpowersave::update 13:14:40:416: filter_function::SIGNAL=Progress 13:14:40:416: filter_function::VALUE=0 13:14:40:416: pDaemon::processClientMessage 13:14:40:416: kpowersave::showProgressDialog 13:14:40:450: filter_function::SIGNAL=Progress 13:14:40:450: filter_function::VALUE=10|unmounting FAT/NTFS partitions 13:14:40:450: pDaemon::processClientMessage 13:14:40:450: kpowersave::showProgressDialog 13:14:40:520: filter_function::SIGNAL=Progress 13:14:40:520: filter_function::VALUE=20|stopping services 13:14:40:520: pDaemon::processClientMessage 13:14:40:520: kpowersave::showProgressDialog 13:14:44:128: filter_function::SIGNAL=Progress 13:14:44:128: filter_function::VALUE=30|ejecting PCMCIA cards 13:14:44:128: pDaemon::processClientMessage 13:14:44:128: kpowersave::showProgressDialog 13:14:44:272: filter_function::SIGNAL=Progress 13:14:44:272: filter_function::VALUE=40|unloading modules 13:14:44:272: pDaemon::processClientMessage 13:14:44:272: kpowersave::showProgressDialog 13:14:44:280: filter_function::SIGNAL=Progress 13:14:44:280: filter_function::VALUE=40|unloading module: ipw2200 13:14:44:280: pDaemon::processClientMessage 13:14:44:280: kpowersave::showProgressDialog 13:14:44:632: filter_function::SIGNAL=Progress 13:14:44:632: filter_function::VALUE=40|unloading module: ehci_hcd 13:14:44:632: pDaemon::processClientMessage 13:14:44:632: kpowersave::showProgressDialog 13:14:44:675: filter_function::SIGNAL=Progress 13:14:44:675: filter_function::VALUE=40|unloading module: uhci_hcd 13:14:44:675: pDaemon::processClientMessage 13:14:44:675: kpowersave::showProgressDialog 13:14:44:910: filter_function::SIGNAL=Progress 13:14:44:910: filter_function::VALUE=40|unloading module: usblp 13:14:44:910: pDaemon::processClientMessage 13:14:44:910: kpowersave::showProgressDialog 13:14:44:931: filter_function::SIGNAL=Progress 13:14:44:931: filter_function::VALUE=50 13:14:44:931: pDaemon::processClientMessage 13:14:44:931: kpowersave::showProgressDialog 13:14:47:358: filter_function::SIGNAL=Progress 13:14:47:358: filter_function::VALUE=60|syncing file systems 13:14:47:358: pDaemon::processClientMessage 13:14:47:358: kpowersave::showProgressDialog 13:14:50:352: filter_function::SIGNAL=Progress 13:14:50:352: filter_function::VALUE=101 13:14:50:352: pDaemon::processClientMessage 13:14:50:352: kpowersave::showProgressDialog 13:14:50:365: kpowersave::closeProgressDialog() 13:14:50:365: filter_function::SIGNAL=Screenlock 13:14:50:365: filter_function::VALUE=global.suspend2ram 13:14:50:365: pDaemon::processClientMessage 13:14:50:365: kpowersave::lockscreen_on_lockEvent 13:15:01:923: filter_function::SIGNAL=PowersaveEvent 13:15:01:923: filter_function::VALUE=global.resume.suspend2ram 13:15:01:923: pDaemon::processClientMessage 13:15:01:923: Powersave Event: 'global.resume.suspend2ram' 13:15:01:923: kpowersave::set_suspend_type 13:15:01:923: kpowersave::setAutoSuspend 13:15:01:924: kpowersave::update 13:16:04:657: kpowersave::updateTooltip Regards, Simon On Mon, 30 Jan 2006, Danny Kukawka wrote: > Hi, > > On Monday 30 January 2006 12:03, Simon Hjorth Bøggild wrote: > > I'm running powersave version 0.11.6 with kpowersave version 0.5.4 on Arch > > Linux with Kernel 2.6.15, KDE 3.5. > > Fine ... what kind of package format use Arch Linux? RPM or DEP? Did you > compile KPowersave by your self? > > > The Kpowersave seems to be working fine, it reports battery/ac status, > > cpu frequency policy and current active scheme (performance, powersave > > etc.). However, when I configure the current active scheme (i.e. > > performance) to Suspend to Ram after say 1 minute of inactivity, nothing > > happens, it never Suspends to ram. If I on other other hand, explicitly > > choose the "Suspend to Ram" option in the Kpowersave menu, my computer > > does indeed Suspend to Ram immediately and correctly and also comes back > > up again when I want to. > > My question is, why does the Actions on inactivity seem to have no effect? > > Maybe a program from the blacklist is running. You maybe can try to enable a > scheme specific blacklist and don't add a program there. > > I checked this here at my machine and all worked as espected (Btw. please > note: there is a difference between set time in configure dialog and the real > time before suspend (max. +30sec)) > > > can I enable some debugging somehow to see if Kpowersave actually tries to > > suspend my computer, but fails (which would be strange, since it works > > fine when doing it explicity also from Kpowersave), or is it a matter of > > kpowersave not recognizing inactivity? > > You could kpowersave recompile with --enable-debug-msg and start kpowersave > then from console to see all debug messages. > > > I previously used Klaptop with no problems (also on inactivity) > > Other information: hal version 0.5.6, dbus version 0.50 > > Cheers, > > Danny > _______________________________________________ > powersave-devel mailing list > [email protected] > http://forge.novell.com/mailman/listinfo/powersave-devel > _______________________________________________ powersave-devel mailing list [email protected] http://forge.novell.com/mailman/listinfo/powersave-devel
