---------- Forwarded Message ---------- Subject: [powersave - Help] RE: Help please,stanby problem Date: Wednesday 29 March 2006 07:45 From: "SourceForge.net" <[EMAIL PROTECTED]> To: [EMAIL PROTECTED]
Read and respond to this message at: https://sourceforge.net/forum/message.php?msg_id=3656836 By: giusepre Ok,thanks The device wich not resume is on irq 1 and 12 and is i8042,i think is mouse or keyboard. I try with modules... and for apic cpu error? What can i do? ---------- Forwarded Message ---------- Subject: [powersave - Help] RE: Help please,stanby problem Date: Wednesday 29 March 2006 07:58 From: "SourceForge.net" <[EMAIL PROTECTED]> To: [EMAIL PROTECTED] Read and respond to this message at: https://sourceforge.net/forum/message.php?msg_id=3656865 By: giusepre I don't know..how to enable i8042 as module? In my .config is only static :( ---------- Forwarded Message ---------- Subject: [powersave - Help] RE: Help please,stanby problem Date: Wednesday 29 March 2006 09:49 From: "SourceForge.net" <[EMAIL PROTECTED]> To: [EMAIL PROTECTED] Read and respond to this message at: https://sourceforge.net/forum/message.php?msg_id=3657107 By: seife So everything works fine. Where is the problem? The i8042 messages are only debug messages. For the APIC i am not sure, but if everything works, where is the problem? ---------- Forwarded Message ---------- Subject: [powersave - Help] RE: Help please,stanby problem Date: Wednesday 29 March 2006 10:25 From: "SourceForge.net" <[EMAIL PROTECTED]> To: [EMAIL PROTECTED] Read and respond to this message at: https://sourceforge.net/forum/message.php?msg_id=3657147 By: giusepre The problem is : first acpi won't restart as log said "starting rc.acpid: ## Starting ACPI daemon: /usr/sbin/acpid ## acpid: can't open /proc/acpi/event: Device or resource busy" :( I try with lsof|grep acpi/event but nothing.. Thanks for help ---------- Forwarded Message ---------- Subject: [powersave - Help] RE: Help please,stanby problem Date: Wednesday 29 March 2006 10:38 From: "SourceForge.net" <[EMAIL PROTECTED]> To: [EMAIL PROTECTED] Read and respond to this message at: https://sourceforge.net/forum/message.php?msg_id=3657161 By: giusepre I see now..when powersave try to resume acpid (rc.acpid) proc/acpi/event is busy if i stop first powersave and then i start acpid,acpid start fine.. I don't understand how to solve this problem. ---------- Forwarded Message ---------- Subject: [powersave - Help] RE: Help please,stanby problem Date: Wednesday 19 April 2006 14:32 From: "SourceForge.net" <[EMAIL PROTECTED]> To: [EMAIL PROTECTED] Read and respond to this message at: https://sourceforge.net/forum/message.php?msg_id=3693892 By: giusepre Finally i know why...the fucked nvidia module cause the problem. If i do powersave -m from init 3,all ok but i can't do it from init 4,because X busy acpi/event,and module nvidia,cannot unload :( ---------- Forwarded Message ---------- Subject: [powersave - Help] RE: Help please,stanby problem Date: Wednesday 19 April 2006 16:09 From: "SourceForge.net" <[EMAIL PROTECTED]> To: [EMAIL PROTECTED] Read and respond to this message at: https://sourceforge.net/forum/message.php?msg_id=3694047 By: giusepre Re-resolved..was not nvidia( :P ) but X..X make busy acpi/events but with option NoPM "1" works fine,acpi restart,and nvidia work ;) ______________________________________________________________________ You are receiving this email because you elected to monitor this forum. To stop monitoring this forum, login to SourceForge.net and visit: https://sourceforge.net/forum/unmonitor.php?forum_id=424162 _______________________________________________ powersave-devel mailing list [email protected] http://forge.novell.com/mailman/listinfo/powersave-devel
