Are both Switch and Controller in the same Linksys Router? If so is it is possible that they are exchanging packets at the local interface instead of wlan0?
Also what does Wireshark/tcpdump tell you? On Tue, 2012-12-04 at 19:05 -0600, Seungwon Shin wrote: > Hello, > > I have turned Linksys router into an OpenFlow switch (Pantou project), and it > is working well. > > Currently, I enabled and added a wireless network interface to the openflow > port (wlan0), and > I connected POX to the switch (Linksys router) as a controller. > And, two hosts are connected to the wlan0 interface and send packets to each > other successfully. > > But, when I tried to flow stat information for wlan0 interface, it has not > been updated at all (always 0). > It seems that other ports for wired links are fine. > > Is this problem of the wireless interface? > > Could you give me some advice or any pointers? > > Thanks in advance > -- ------------------------------------------------------- William Emmanuel S. Yu, Ph.D. (杨怀义) Department of Information Systems and Computer Science Ateneo de Manila University email : wyu at ateneo dot edu blog : http://hip2b2.yutivo.org/ web : http://CNG.ateneo.edu/cng/wyu/ phone : +63(2)4266001 loc. 4186 GPG : http://CNG.ateneo.net/cng/wyu/wyy.pgp Confidentiality Issue: This message is intended only for the use of the addressee and may contain information that is privileged and confidential. If you are not the intended recipient, you are hereby notified that any use or dissemination of this communication is strictly prohibited. If you have received this communication in error, please notify us immediately by reply and delete this message from your system.
