im following pantuo, and has configred every lan port to saperate vlan and assigned a saperate subnet and use the vlan ip as default gw to computer on that port. do i hv to change any thing in that ? canu share ur configs ? or do i have to change the port type to bridge and then configure veth.
thanks, On Mon, May 20, 2013 at 12:16 PM, Murphy McCauley <[email protected] > wrote: > Most recently, I have done this by creating a veth pair where one end is > on the OpenFlow datapath. The other end, therefore, is just like a port to > another computer on a LAN; you can do normal Linux IP forwarding between it > and your WAN interface, complete with iptables-based NAT. And if you, for > example, run dnsmasq bound to that interface, you can get DNS/DHCP on ports > connected to the datapath. > > -- Murphy > > On May 19, 2013, at 11:37 PM, Shabbir Ahmed wrote: > > thanks, > > I have a tp-link router, I want to add all lan-ports to Datapath and want > to use WAN port as controller port(that connects to controller) and use it > as wan/nat port for internet browsing for the users connected to WIFI and > LAN ports. > > i dont want DHCP and NAT be running through Openflow, daemons like dnsmasq > should let me achieve that and iptables, openflow is only used for allowing > and blocking or playing with lan traffic. > > thanks, > Shabbir. > > >
