I just want to confirm because I followed following links and none of them work for me
http://danny270degree.blogspot.com/2012/06/openflow-update-and-setup-tp-link-tl.html http://archive.openflow.org/wk/index.php/Pantou_:_OpenFlow_1.0_for_OpenWRT#Network_Configuration_2 I have POX controller on my laptop and I am assigning following IP's Laptop having POX controller is connected to WAN port. IP of WAN port of tp-link 1043 192.168.1.1 IP to my laptop as 192.168.1.10 IP of tp-link interface 0.1 192.168.2.1 IP of System connected to interface 0.1 is 102.168.2.10 IP of tp-link interface 0.2 192.168.2.2 IP of System connected to interface 0.1 is 102.168.2.20 I am running POX controller with IP address similar to my PC. I don't know whether I am doing it right or wrong. I am running pox controller with IP given below and I am also not sure about port. I am just giving port 6633 sudo ./pox.py openflow.of_01 --address=192.168.1.10 --port=6633 When I tried to ping one host from another pox controller is still not working. Can anybody please tell me how should I do this and am I using correct IP networks?? On Wed, Dec 4, 2013 at 1:50 AM, Sayed Qaiser Ali Shah < 11msitqs...@seecs.edu.pk> wrote: > Thanks I got it from the links which you provided by using "vi" > Let me try. > :) > > > On Wed, Dec 4, 2013 at 1:47 AM, Sayed Qaiser Ali Shah < > 11msitqs...@seecs.edu.pk> wrote: > >> Thank you so much for your help. >> I have no idea how to enter /etc/config/openflow. >> Can you please tell me. When I ssh the openwrt I tried "cd ~/etc" but >> didn't work. How can I enter /etc? I have no idea about openwrt. >> >> >> On Wed, Dec 4, 2013 at 1:30 AM, Alison Chan <chan7...@kettering.edu>wrote: >> >>> HI Sayed, >>> In /etc/config/openflow on the openwrt router, there will be a line >>> that specifies the controller IP and port. Change that to the computer >>> that's running pox, and run: >>> >>> /etc/config/openflow restart >>> >>> to make the switch talk to your pox instance. >>> >>> These links should also be of use to you: >>> >>> >>> http://danny270degree.blogspot.com/2012/06/openflow-update-and-setup-tp-link-tl.html >>> >>> >>> http://archive.openflow.org/wk/index.php/Pantou_:_OpenFlow_1.0_for_OpenWRT#Network_Configuration_2 >>> >>> (Sorry for the lack of very specific answers, I'm not nearby our >>> TL-WR1043NDs today.) >>> >>> Cheers, >>> Alison >>> >>> On Tue, Dec 3, 2013 at 2:37 PM, Sayed Qaiser Ali Shah >>> <11msitqs...@seecs.edu.pk> wrote: >>> > Thanks Alison. It worked. Do you have idea how to use POX with openwrt? >>> > >>> > >>> > On Wed, Dec 4, 2013 at 12:31 AM, Alison Chan <chan7...@kettering.edu> >>> wrote: >>> >> >>> >> Did you set a root password in the openwrt box? If so, then you need >>> >> to use ssh instead of telnet to log into it. >>> >> >>> >> Cheers, >>> >> Alison >>> >> >>> >> On Tue, Dec 3, 2013 at 2:29 PM, Sayed Qaiser Ali Shah >>> >> <11msitqs...@seecs.edu.pk> wrote: >>> >> > Hello Everybody, >>> >> > >>> >> > I want to use POX controller with openwrt which I have installed on >>> >> > TP-Link >>> >> > WR1043ND. I searched for it but didn't work for me. I am new to >>> openwrt. >>> >> > I >>> >> > tried to telnet my TP-Link device but it didn't log in. When I >>> checked >>> >> > Telnet in browser, it is enabled. I got this: >>> >> > >>> >> > Trying 192.168.1.1... >>> >> > Connected to 192.168.1.1. >>> >> > Escape character is '^]'. >>> >> > Login failed. >>> >> > Connection closed by foreign host. >>> >> > >>> >> > Can anybody help me how can I use pox controller with openwrt??? >>> >> >>> >> >>> >> >>> >> -- >>> >> Alison Chan >>> >> chan7...@kettering.edu >>> >> +1 909 278 7753 >>> >> >>> >> Sedulously eschew obfuscatory hyperverbosity or prolixity. >>> > >>> > >>> > >>> > >>> > -- >>> > Regards >>> > >>> > Sayed Qaiser Ali Shah >>> > MSIT-12 >>> > NUST (SEECS) >>> >>> >>> >>> -- >>> Alison Chan >>> chan7...@kettering.edu >>> +1 909 278 7753 >>> >>> Sedulously eschew obfuscatory hyperverbosity or prolixity. >>> >> >> >> >> -- >> >> >> >> >> *Regards Sayed Qaiser Ali ShahMSIT-12 NUST (SEECS)* >> > > > > -- > > > > > *Regards Sayed Qaiser Ali ShahMSIT-12 NUST (SEECS)* > -- *RegardsSayed Qaiser Ali ShahMSIT-12NUST (SEECS)*
