Thank you
I am working in pox and mininet, I think I am using openveswitch.

Regards,

> On ٠٢‏/٠٢‏/٢٠١٥, at ١٢:٥٥ م, Murphy McCauley <murphy.mccau...@gmail.com> 
> wrote:
> 
> That depends on the switch you're using.  Unless you're using the POX 
> datapath, you should probably ask on the switch's 
> site/mailing-list/other-support-mechanism.  For example, if you're using Open 
> vSwitch, it has its own mailing lists.
> 
> -- Murphy
> 
>> On Feb 2, 2015, at 1:50 AM, AMER <amer7...@hotmail.com> wrote:
>> 
>> Hello,
>>  
>> Dear Murphy
>> Yes I am trying to increase the VLAN tag to be 6 bytes. I have modified the 
>> vlan code on vlan.py under pox directory
>> how can i do the same for the switch, I just need to increase the size 
>> nothing else :-).
>>  
>> Regards,
>> 
>> Eng Amer Alghadhban
>> COE
>> SANS-GCFW
>> CEH, SCNP, CCNA
>> 
>>  
>> Subject: Re: Error in openflow
>> From: murphy.mccau...@gmail.com
>> Date: Sun, 1 Feb 2015 12:45:40 -0800
>> CC: pox-dev@lists.noxrepo.org
>> To: amer7...@hotmail.com
>> 
>> Are you saying that you're altering the OpenFlow protocol so that it can 
>> specify VLAN tags larger than two bytes?  And modifying a switch so that it 
>> can match and probably insert and remove these larger VLAN tags?  (If so, 
>> I'd have thought that using VXLAN would be an easier way or that using an 
>> extension would be cleaner, but that's another issue.)
>> 
>> So you're getting an error from the switch saying that it thinks you've sent 
>> it a flow-mod with the emergency flag *and* timeouts set, which isn't 
>> allowed.  Assuming that you're not trying to set an emergency flow, the most 
>> likely explanation here is that the flow-mod is either being constructed 
>> wrong or parsed wrong.  If you're modifying the match structure to 
>> accommodate larger VLAN tags, make sure you've modified it the same way on 
>> both the switch and controller.
>> 
>> -- Murphy
>> 
>> On Feb 1, 2015, at 3:35 AM, AMER <amer7...@hotmail.com> wrote:
>> 
>> Dear all
>> 
>> I am using POX carp
>> I am receiving this error
>> 
>> [00-00-00-00-00-02 143] Error: header:
>> [00-00-00-00-00-02 143] Error: version: 1
>> [00-00-00-00-00-02 143] Error: type: 1 (OFPT_ERROR)
>> [00-00-00-00-00-02 143] Error: length: 76
>> [00-00-00-00-00-02 143] Error: xid: 719
>> [00-00-00-00-00-02 143] Error: type: OFPET_FLOW_MOD_FAILED (3)
>> [00-00-00-00-00-02 143] Error: code: OFPFMFC_BAD_EMERG_TIMEOUT (3)
>> [00-00-00-00-00-02 143] Error: datalen: 64
>> [00-00-00-00-00-02 143] Error: 0000: 01 0e 00 48 00 00 02 cf 00 10 00 1f 00 
>> 00 00 00 |...H............|
>> [00-00-00-00-00-02 143] Error: 0010: 00 00 00 00 00 00 00 00 00 00 4e 6f 6e 
>> 65 00 00 |..........None..|
>> [00-00-00-00-00-02 143] Error: 0020: 00 00 00 00 00 00 00 00 00 00 00 00 00 
>> 00 00 00 |................|
>> [00-00-00-00-00-02 143] Error: 0030: 00 00 00 00 00 00 00 00 00 00 00 00 00 
>> 03 00 00 |................|
>> INFO:openflow.of_01:[00-00-00-00-00-01 144] closed
>> INFO:openflow.of_01:[00-00-00-00-00-02 143] closed
>> 
>> I am trying to extend the vlan header size, sorted almost all errors but 
>> finally I am facing this and I do not understand it.
>> 
>> Best regards,
>> Amer
>> 
>> Eng Amer Alghadhban
>> COE
>> SANS-GCFW
>> CEH, SCNP, CCNA
> 

Reply via email to