on 3/12/2002 12:57, Julian Thomas wrote : > Has anyone successfully profiled a 2100? I think there is one in my future > and I've heard reports from colleagues that the Epson driver for this is as > unhelpful as ever (almost randomly non-linear). I've seen excellent output > from 7600, but have heard the 2100 is a different beast entirely. OF course you can. Probably best thought to use Bill Atkinsons profiles for the 7600 which should be the same. It's not easy to control the inks without the measured charts creating bad profiles. IF not buy a good rip. Me I prefer Best. Yet , for photographers it seems that the ImagePrint rgb rip is good. I can't say as I don't have this printer yet. I did use it for an Apple Expo though with Best on MacOsX (pre-release) and it was very good. In Europe at least it's delivered with the Grey balancer which you can tweak til yer hearts happy. -- Neil Snape http://mapage.noos.fr/nsnape
=============================================================== GO TO http://www.prodig.org for ~ GUIDELINES ~ un/SUBSCRIBING ~ ITEMS for SALE
