On Behalf Of Jay Myrdal > > The support arm is > attached to the printer case using a Velcro strip. While > this allows adjustment it is not very stable and from time to > time (far too often) the arm sags sufficiently for the ink > tubes to foul the print head and jam the printer.
Hi Jay, Have a look at this link: http://www.mwords.co.uk/pages/cis/operationFAQ.htm#FixSupportBarDroop Depending on your exact issue, you may not need to resort to a drill. We find the simple method noted can give you the leverage required to give the velcro something to push/ pull against. There are a couple of other suggestions for fixing the issue that do not involve permanent modifications to the printer. Failing that, don't drill the support bar but either side of it, then tie the bar down with string or a cable-tie type thing. I hope that helps, Nij Nigel Rheam MWORDS Limited www.mwords.co.uk Digital Fine Art =============================================================== GO TO http://www.prodig.org for ~ GUIDELINES ~ un/SUBSCRIBING ~ ITEMS for SALE
