Hola Xabier, Is the PCD 421. I attach the mail from the Barco support service. BTW, Does anyone know what is OSD ( On screen Display)
Dear Sir, It is true that in order to get the resolution you want you need to check "show me all". Normally moir� is independent of the OS, but it is possible that you see it better on another background. In order to minimize the moir� you can use the OSD (On Screen Display), there you need to go to other settings, white uniformity, V moire canceller. If you select this, you can change the position of the slider till the moir� is solved. Then you can do the same with H moire canceller. You also can use CalibratorTalk to minimize the moir�. You can find this in the advanced settings of the Geometry tab. Here too, you better begin with the Vertical Moir� and then (if necessary) the Horizontal. Xavier Carreras el 11/7/03 08:28 escribi� > El 10/7/03 20:39, "aitor Pe�a Incl�n" <[EMAIL PROTECTED]> > escribi�: > >> Hi, >> I have a Barco monitor. Working in Os 9.2 all is fine and I can chose >> between different resolutions. I have recently install OSX 10.2.6. If I go >> to the preferences panel/ monitor and in the resolution chose "show me >> recommended" I only have 800x600 available. If I chose " show me all" and >> chose 1280x1024 that is the one that I use in 9.2, then some king of newton >> rings appear in the edges of the display. I have try to use the >> calibratortalk app., reset to the original settings and try to resolve it >> but this kind of moire don't disappear . >> Any idea of what's happen? >> >> My Mac is a G4 ( blue and white) >> 400 Mhz. >> 768 mg RAM >> A video car in the PCI (AGP) slot >> ATY Rage 128 Pro. >> >> Best regards >> Aitor > > Hola Aitor > > Which Barco monitor do you have? And wich software version? As I remember > PCD321+ is not supported under OS X. Also there has been some problems with > certain video boards in OS X, so you should check its latest drivers > available. > > Long time ago I noticed some Newton rings (very soft ones) but it was under > OS9. Ati Rage 128 pro and IX View video boards. > > Are there any members in this list using PCD421 under OSX? If so, would you > please tell me why Gamma Loader does not start up when booting as it use to > do under OS9? > > Best regards > Xavier Carreras > > > =============================================================== > GO TO http://www.prodig.org for ~ GUIDELINES ~ un/SUBSCRIBING ~ ITEMS for SALE =============================================================== GO TO http://www.prodig.org for ~ GUIDELINES ~ un/SUBSCRIBING ~ ITEMS for SALE
