> Hi, > > I am currently working at a college and helping out with the conversion to > OSX 10.2. All gone well so far except for the Polaroid Scanner. It is a > SprintScan 45 Ultra, and it is connected via an Adaptec 2906 SCSI card. We > are running the scanner on a G4, 400hz and with 384MB of RAM, all running > under OSX 10.2. The scanning software say's that it can't locate the > scanner and that I should update the OS to a newer version. Any one been > there and done that or is a case of dropping back to Classic. If it is set > it up to do that will Classic pick up the SCSI card or will we have to dual > boot up in pure OS9.2?
Is the scanner visible using the apple system profiler? If it is then try a copy of Vuescan(I think it's supported) to see if it can be accessed? Check out termination settings and cables (try several) since osx is much more picky about such things and often fails with a setup that's fine under os9 If you still get stuck let me know some more details... bye for now Keith Cooper Northlight Images http://northlight-images.co.uk Photography - Digital Imaging - Apple Mac Consultancy Tel +44 (0)116 291 9092 Mobile +44 (0)780 162 9397 =============================================================== GO TO http://www.prodig.org for ~ GUIDELINES ~ un/SUBSCRIBING ~ ITEMS for SALE
