-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Matt Littler Sent: 21 September 2004 12:38 To: [EMAIL PROTECTED] Subject: RE: [PRODIG] Epson 1290 with CIS printing problems[Scanned]
Yes, Pauls method is correct. An alternative if you have build up of solids (i.e. dust etc) rather than liquids in the system is to get a sheet of paper - quite thick prefereably - and spray repositionable adhesive liberally on both sides. We sell it as Re-Tac, but many other people sell the same thing. Wait until it is just tacky to the touch. Not sticky, as you don't want it to stick to the rollers, just leave about 3-4 minutes, then feed this through the printer by the method that Paul has described. Kind regards Matt Littler Technical Sales Executive Nova Darkroom and Permajet http://www.novadarkroom.com http://www.permajet.com Photokina - Germany 2004 Hall 14.2 Stand KO71 -----Original Message----- From: Paul Bradforth Yes, clear Windolene, and it should say 'original' on the bottle. =============================================================== GO TO http://www.prodig.org for ~ GUIDELINES ~ un/SUBSCRIBING ~ ITEMS for SALE =============================================================== GO TO http://www.prodig.org for ~ GUIDELINES ~ un/SUBSCRIBING ~ ITEMS for SALE
