Hi Joel,Geoffroy, We could able to port IVI 1.0 version on to Crossville E6xx platform.
On boot up we could see a console. We would like port a application. Can you let me know the location to download sample applications. Regards, Kishore On Fri, May 31, 2013 at 10:27 PM, Clark, Joel <[email protected]> wrote: > Since Kishore is building against the July 12, 2012 repositories, he > will find the EMGD graphics driver for the Intel Atom E6xx. The driver > binary (no source is available) is found here**** > > ** ** > > > http://download.tizen.org/releases/previews/1.0/ivi/tizen-ivi_20120712.3/repos/non-oss/ia32/packages/i586/ > **** > > ** ** > > The last Tizen preview with that graphics driver was released in Sept > 2012. **** > > ** ** > > regards**** > > Joel**** > > ** ** > > ** ** > > *From:* [email protected] [mailto: > [email protected]] *On Behalf Of *VanCutsem, Geoffroy > *Sent:* Friday, May 31, 2013 9:37 AM > *To:* kishore divvela; Ding, Jian-feng > *Cc:* [email protected]; [email protected] > > *Subject:* Re: [Tizen Product-dev] Fwd: help on tizen**** > > ** ** > > Hi Kishore,**** > > ** ** > > That particular error is most likely caused by the fact your USB stick was > automatically mounted when you inserted it. You should unmount it first. > Use ‘sudo umount /dev/sdb*’ for that but do **not** use any ‘eject’ > function from the GUI because that will free up the device node altogether. > **** > > ** ** > > Be aware though that the Crossville board is not supported in Tizen and I > would be surprised if you can boot it at all (I’m pretty sure the > Crossville-ST won’t boot at all and I suspect the same may be true for the > Crossville-Lapis). In any case, we do not have the graphics drivers (EMGD) > for the Intel Atom E6xx processor in Tizen so you may find the overall > experience a bit limited even it you can boot the system.**** > > ** ** > > I’d recommend you actually switch to one of the platforms that we support > in IVI: https://wiki.tizen.org/wiki/IVI/IVI_Platforms**** > > ** ** > > Thanks,**** > > Geoffroy**** > > ** ** > > *From:* kishore divvela > [mailto:[email protected]<[email protected]>] > > *Sent:* Friday, May 31, 2013 8:02 PM > *To:* Ding, Jian-feng > *Cc:* VanCutsem, Geoffroy; [email protected]; > [email protected] > *Subject:* Re: [Tizen Product-dev] Fwd: help on tizen**** > > ** ** > > hi Jf.ding,**** > > Thanks for all your help so far.**** > > Now i am loading a image to Crossville platform with ivi image. i have > installed the bmaptool, and followed the below wikilink for loading the > image. > > *https://wiki.tizen.org/wiki/IVI/IVI_Installation#SectCopyToUSBStick***** > > *I am getting the following error ***** > > > > bmaptool copy > http://download.tizen.org/releases/previews/1.0/ivi/tizen-ivi_20120712.3/images/ivi-main-min-auto/ivi-main-min-auto-tizen-ivi_20120712.3-sdb.raw.bz2/dev/sdb > bmaptool: ERROR: cannot open block device '/dev/sdb' in exclusive mode: > [Errno 16] Device or resource busy: '/dev/sdb'**** > > Please let me know how to load the image to pendrive. > > Regards,**** > > Kishore**** > > ** ** > > On Thu, May 30, 2013 at 5:02 PM, kishore divvela <[email protected]> > wrote:**** > > Hi Jf.ding,**** > > Thanks for your help, I am able to create the image with 2.1 sources.**** > > Regards,**** > > Kishore**** > > ** ** > > On Thu, May 30, 2013 at 6:04 AM, Jian-feng Ding <[email protected]> > wrote:**** > > I prefer you try the latest tizen-2.1 images: > http://download.tizen.org/snapshots/2.1/common/tizen-2.1_20130520.2/images/ > > thanks > - jf.ding**** > > > On Wed, May 29, 2013 at 09:19:08PM +0530, kishore divvela wrote: > > Hi jf.ding, > > > > Thanks for your help. After installing i am able to run gbs and download > > the package from git, but ssh clone is not working, so i used direct > > cloning as mentioned in video, and i am able to download the packages. > > > > Now i am in process of creating image, for this i followed the below > steps > > from > https://source.tizen.org/documentation/developer-guide/creating-images > >**** > > > *1. Original kickstart file has been obtained by following the link > below:* > > * > > > http://download.tizen.org/snapshots/trunk/common/latest/builddata/image-configs/ > > > > * > > > > * repo --name=Tizen-main > > --baseurl= > http://download.tizen.org/snapshots/trunk/common/latest/repos/tizen-main/armv7l/packages/* > > > > *There is no files exist in this path. > > * > > * > > * > > *So i took the kickstart file from**** > > > > http://download.tizen.org/snapshots/2.1/common/latest/images/RD-210/RD-210.ks > , > > Is this correct? > > > > and later copied the content to one text file and i change the below > lines**** > > > and saved to "Downloads" folder on my PC* as per video session.**** > > > > > > > #repo --name=Tizen-main --baseurl= > > > https://download.tizendev.org/snapshots/trunk/common/@BUILD_ID@/repos/tizen-main/armv7l/packages/--#save > > --ssl_verify=no > > repo --name=Tizen-main --baseurl= > > > http://download.tizen.org/snapshots/trunk/common/latest/repos/main/armv7l/packages/--save > > --ssl_verify=no > > > > #repo --name=Tizen-base --baseurl= > > > https://download.tizendev.org/snapshots/trunk/common/@BUILD_ID@/repos/tizen-base/armv7l/packages/--#ssl_verify=no > > > > repo --name=Tizen-base --baseurl= > > > http://download.tizen.org/snapshots/trunk/common/latest/repos/base/armv7l/packages/--ssl_verify=no > >**** > > > *2. I ran the sudo mic command for creating image.* > > > > * labpc@labpc-P5GD2-TVM-GB-SI:~/Downloads$ sudo mic create loop > > --taring-to=RD-210-rs.tar.gz RD-210.ks > > > > * > > * I am getting the following error***** > > > > > mic 0.19 (Ubuntu 13.04 raring) > > Info: Substitute macro variable @BUILD_ID@/@ARCH@ in ks: RD-210.ks > > Info: Retrieving repo metadata: > > > > Error <creator>: [Errno 14] HTTP Error 404 : > > > http://download.tizen.org/snapshots/trunk/common/latest/repos/main/armv7l/packages/armv7l/repodata/repomd.xml > > labpc@labpc-P5GD2-TVM-GB-SI:~/Downloads$ sudo mic create loop > > --taring-to=RD-210-rs.tar.gz RD-210.ks > > mic 0.19 (Ubuntu 13.04 raring) > > Info: Substitute macro variable @BUILD_ID@/@ARCH@ in ks: RD-210.ks > > Info: Retrieving repo metadata: > > Info: Retrieving 4a1f9ae42efc07f1d9c19a7cb9b8e96376afc25e676a9bc0942Info: > > Retrieving 9cef6d9c25906b9e920c0772f3f1cded750887ccd640276265bInfo: > > Retrieving 357a89fbef04c88f07974024d45336194ba691184b9c5539a8eInfo: > > Retrieving e0ffa2876a0d888fc99a5f9c2097b406c5824fa3134790020f05d ... DONE > > > > Info: Use detected arch armv7l. > > Info: Creating tizen bootstrap ... > > > > Warning <bootstrap>: <bootstrap>Can't get rpm binary: > mic-bootstrap-x86-arm > > Q: Switch to native mode and continue?(Y/n) y > > Info: Substitute macro variable @BUILD_ID@/@ARCH@ in ks: RD-210.ks > > Info: Retrieving repo metadata: > > Info: Retrieving repomd.xml ... DONE > > Warning: Failed to load plugin backend/zypppkgmgr: libudev.so.0: cannot > > open shared object file: No such file or directory > > Warning: vdso is enabled on your host, which might cause problems with > arm > > emulations. > > You can disable vdso with following command before starting image > build: > > echo 0 | sudo tee /proc/sys/vm/vdso_enabled > > > > Error <creator>: Failed to find group 'common' : No Group named common > > exists > >**** > > > *Which latest release i should use? , also can you send me the kickstart > > file with correct path for creating image?* > > > > > > > > Thanks & Regards, > > Kishore**** > > ** ** > > ** ** > > Intel Corporation NV/SA > Kings Square, Veldkant 31 > 2550 Kontich > RPM (Bruxelles) 0415.497.718. > Citibank, Brussels, account 570/1031255/09**** > > This e-mail and any attachments may contain confidential material for the > sole use of the intended recipient(s). Any review or distribution by others > is strictly prohibited. If you are not the intended recipient, please > contact the sender and delete all copies.**** >
_______________________________________________ Product-dev mailing list [email protected] https://lists.tizen.org/listinfo/product-dev
