Yep. Multi-part forms. There is a line spacing setting, but it doesn't
seem to go the right way.
There is 8 lines per inch
7/72 inch line spacing
6 lines per inch
n/216 inch line spacing
n/72 inch line spacing
What I need is 4.33 lines per inch. Not sure how to fit that into
one of the formulas above. (.232558 inches per line)
Jeff
---------------
Jeff Johnson
[email protected]
(623) 582-0323
www.san-dc.com
On 02/22/2012 12:43 PM, Michael Madigan wrote:
> You'll have to look at the users manual of the printer to see if it supports
> what you want it to do.
>
> Years ago you used to be able to print in graphics mode, so you could print a
> photo using a dot matrix printer, but that was extremely slow.
>
> What's the application here? Is it multi-part forms?
>
>
> ________________________________
> From: Jeff Johnson<[email protected]>
> To: [email protected]
> Sent: Wednesday, February 22, 2012 2:33 PM
> Subject: Dot Matrix Printing
>
> I am attempting to print using a dot matrix on a preprinted form. The
> trouble is that the lines I have to work with are not the standard
> number of lines per inch. Is there a way to put a line and a half
> between two lines?
>
_______________________________________________
Post Messages to: [email protected]
Subscription Maintenance: http://leafe.com/mailman/listinfo/profox
OT-free version of this list: http://leafe.com/mailman/listinfo/profoxtech
Searchable Archive: http://leafe.com/archives/search/profox
This message: http://leafe.com/archives/byMID/profox/[email protected]
** All postings, unless explicitly stated otherwise, are the opinions of the
author, and do not constitute legal or medical advice. This statement is added
to the messages for those lawyers who are too stupid to see the obvious.
