> Your Zip drive is showing up on sda according to the output below. Zip > disks are setup on partition 4 so you should be able to access Zip disks > at /dev/sda4 Yes, but unfortunately 186:root /tmp: mount -t vfat /dev/sda4 /mnt/zip mount: /dev/sda4 is not a valid block device (a formated disk is in the drive, of course). I made a script to scan all sd[a-h][1-15] but I couldn't mount it anywhere... Any help? Thanks Cl�udio > SCSI subsystem driver Revision: 1.00 > scsi0 : SCSI host adapter emulation for IDE ATAPI devices > Vendor: HP Model: CD-Writer+ 8100 Rev: 1.0g > Type: CD-ROM ANSI SCSI revision: 02 > ppa: Version 2.07 (for Linux 2.4.x) > ppa: Found device at ID 6, Attempting to use EPP 16 bit > ppa: Communication established with ID 6 using EPP 16 bit > scsi1 : Iomega VPI0 (ppa) interface > Vendor: IOMEGA Model: ZIP 100 Rev: J.03 > Type: Direct-Access ANSI SCSI revision: 02 > Detected scsi removable disk sda at scsi1, channel 0, id 6, lun 0 > SCSI device sda: 196608 512-byte hdwr sectors (101 MB) > sda: Write Protect is off > sda: sda4 > Detected scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0 > sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
