I'm surprised that you can get some timer event output, it must
be by pure coincident, please post to beta forum if you further
disscusion, thanks.
Пт, 30 май 2014, jprogramming написал(а):
> thank you Bill and Joe, with new version it works. Also wd 'pshow' is not
> necessary.
>
> multiple timers may not work though.
>
> cocurrent 't'
> create =: 3 : 0
> ('a', (> 18!:5 ''), '_timer') =: 3 : 'smoutput (> 18!:5 '''') ,'': '', ":
> (6!:0) '''''
> wd 'pc ' , 'a', (> 18!:5 '')
> resume y
> )
> NB. a_timer =: 3 : 'smoutput (> 18!:5 '''') ,'': '', ": (6!:0) '''''
> stop =: 3 : 0
> wd 'ptimer 0'
> )
> resume =: 3 : 0
> wd 'ptimer ', ": y
> )
> kill =: 3 : 0
> wd 'pclose'
> codestroy ''
> )
>
> a =. 4000 conew 't' NB. will start timer
>
> stop__a '' NB. will stop timer
>
> a
> ┌─┐
> │1│
> └─┘
>
> ] b =. 4000 conew 't' NB. will start new timer ... replacing old.
> ┌─┐
> │2│
> └─┘
> NB. you will see that only timer from b runs. resume__a 2000 will run the
> timer from b. This error will repeat if you create a 3rd instance. Only
> timer from last instance runs, even though they all have different "forms" a1
> and a2. stop__a '' will stop the timer even if only b is running.
>
> a1_timer__a '' NB. a1 comes from using the locale number for variable a
> 1: 2014 5 30 22 28 48.138
>
> a2_timer__b '' NB. a2 comes from using the locale number for variable b
> 2: 2014 5 30 22 29 17.594
>
> If you kill either a or b, then resume__a 3000 will fail, as both "forms" are
> killed.
>
> resume__a 3000
> |ptimer : no parent selected: wd
>
>
> Perhaps this is related to my poor understanding of how to run multiple
> copies of a form?
>
>
> ----- Original Message -----
> From: Joe Bogner <[email protected]>
> To: [email protected]
> Cc:
> Sent: Friday, May 30, 2014 9:21:00 PM
> Subject: Re: [Jprogramming] opportunity to show off jhs or qt
>
> Pascal, you need to update to the latest.
>
> Engine: j701/2011-01-10/11:25
>
> Library: 8.02.06
>
> Qt IDE: 1.1.2/5.3.0
>
> Platform: Win 32
>
> Installer: J802 install
>
> InstallPath: c:/users/joe/j802
>
>
>
> This works on the latest
>
>
> NB. run two timers
>
> NB. works on j802 beta from 5/28
>
> wd 'pc c'
>
> wd 'pshow' NB. shows empty form
>
> wd :: empty 'ptimer 1000'
>
>
> c_timer =: 3 : 'smoutput@:<''c'';(6!:0) '''''
>
>
> wd 'pc d'
>
> wd 'pshow' NB. shows empty form
>
> wd :: empty 'ptimer 1000'
>
>
> d_timer =: 3 : 'smoutput@:<''d'';(6!:0) '''''
>
>
>
> This worked on the previous
>
>
>
> NB. worked previous j802 beta
>
> wd 'pc a'
>
> wd 'cc g opengl version 2.0 flush'
>
> wd 'pshow' NB. shows empty form
>
> wd 'set g timer 1000'
>
> a_g_timer =: 3 : 'smoutput@:<''a'';(6!:0) '''''
>
>
> wd 'pc b'
>
> wd 'cc g opengl version 2.0 flush'
>
> wd 'pshow' NB. shows empty form
>
> wd 'set g timer 1000'
>
> b_g_timer =: 3 : 'smoutput@:<''b'';(6!:0) '''''
>
>
>
>
> I was stuck on it too
>
>
>
> On Fri, May 30, 2014 at 9:12 PM, 'Pascal Jasmin' via Programming <
> [email protected]> wrote:
>
> > Engine: j701/2011-01-10/11:25
> > Library: 8.02.06
> > Qt IDE: 1.1.1/5.3.0
> > Platform: Win 64
> >
> >
> > ----- Original Message -----
> > From: bill lam <[email protected]>
> > To: "[email protected]" <[email protected]>
> > Cc:
> > Sent: Friday, May 30, 2014 8:12:21 PM
> > Subject: Re: [Jprogramming] opportunity to show off jhs or qt
> >
> > what is your JVERSION ?
> >
> > 31.05.2014, в 8:03, "'Pascal Jasmin' via Programming" <
> > [email protected]> написал(а):
> >
> > > the shader demo works. cube rotates, etc...
> > >
> > > when I try those 3 lines from the base locale (jqt802 console session),
> > the error shown occurs.
> > >
> > >
> > > ----- Original Message -----
> > > From: bill lam <[email protected]>
> > > To: "[email protected]" <[email protected]>
> > > Cc:
> > > Sent: Friday, May 30, 2014 8:00:24 PM
> > > Subject: Re: [Jprogramming] opportunity to show off jhs or qt
> > >
> > > did the cube rotate? did you test on the latest j802/jqt beta?
> > >
> > > 31.05.2014, в 7:48, "'Pascal Jasmin' via Programming" <
> > [email protected]> написал(а):
> > >
> > >> from base,
> > >>
> > >> wd 'pc a;' NB. or 'pc a'
> > >> wd 'pshow' NB. shows empty form
> > >> wd 'ptimer 2000'
> > >> |ptimer : parent command not found: ptimer: wd
> > >>
> > >>
> > >> a_timer_base_
> > >> 3 : 'smoutput@:(6!:0) '''''
> > >>
> > >> is this something related to base locale?
> > >>
> > >> shader demo works ok.
> > >>
> > >>
> > >> ----- Original Message -----
> > >> From: bill lam <[email protected]>
> > >> To: "[email protected]" <[email protected]>
> > >> Cc:
> > >> Sent: Friday, May 30, 2014 6:40:53 PM
> > >> Subject: Re: [Jprogramming] opportunity to show off jhs or qt
> > >>
> > >> You didn't even create a form. To recap, a form is created using wd cmd
> > eg
> > >>
> > >> wd'pc foo'
> > >>
> > >> the locale of a form is the current locale when that wd'pc foo' is
> > executed.
> > >>
> > >> 31.05.2014, в 0:49, "'Pascal Jasmin' via Programming" <
> > [email protected]> написал(а):
> > >>
> > >>> sorry for previous message, was running timer and not ptimer.
> > >>>
> > >>> It does not appear as though you can get a timer into an arbitrary
> > locale by just doing wd 'pc a' there. The form has to be visible, or needs
> > an initial show?
> > >>>
> > >>>
> > >>>
> > >>>
> > >>> ----- Original Message -----
> > >>> From: 'Pascal Jasmin' via Programming <[email protected]>
> > >>> To: "[email protected]" <[email protected]>
> > >>> Cc:
> > >>> Sent: Friday, May 30, 2014 12:23:37 PM
> > >>> Subject: Re: [Jprogramming] opportunity to show off jhs or qt
> > >>>
> > >>> Nice, thank you.
> > >>>
> > >>> You can also use a timer in any arbitrary locale (I think)
> > >>>
> > >>> a_timer_ =: show_base_
> > >>> wd_a_ 'timer 2000'
> > >>>
> > >>> or
> > >>>
> > >>> aa =. conew 'a'
> > >>> wd__aa 'timer 2000'
> > >>>
> > >>> acts a little weird with just one plot window, but that might be plot
> > related?
> > >>>
> > >>>
> > >>> ----- Original Message -----
> > >>> From: bill lam <[email protected]>
> > >>> To: 'Pascal Jasmin' via Programming <[email protected]>
> > >>> Cc:
> > >>> Sent: Friday, May 30, 2014 11:19:17 AM
> > >>> Subject: Re: [Jprogramming] opportunity to show off jhs or qt
> > >>>
> > >>> Oh sorry! I thought ptimer was documented but not yet. Basically
> > >>> it is very simple, if your form id is 'foo' then the name of the
> > >>> timer callback verb is 'foo_timer' in the form's locale. Each form
> > >>> has its own timer. wd'ptimer xx' will start or stop timer attached
> > >>> to the current form. Unlike the old wd timer, form timers will not
> > >>> break existing code. In qt shader demo, the cube is rotated by a
> > >>> form timer.
> > >>>
> > >>> Пт, 30 май 2014, jprogramming написал(а):
> > >>>> good news about wd 'timer' for forms. A wishlist would include a way
> > for minimal library load for jconsole support.
> > >>>>
> > >>>> I don't see it mentioned here though
> > http://www.jsoftware.com/jwiki/System/ReleaseNotes/J802
> > >>>>
> > >>>> I did see that the timer qt demo app has been updated, but its hard
> > to understand without a "qtdemo form"
> > >>>>
> > >>>> there is no mention of wd 'ptimer' here:
> > http://www.jsoftware.com/jwiki/Guides/Window%20Driver/Command%20Reference
> > >>>>
> > >>>>
> > >>>> ----- Original Message -----
> > >>>> From: bill lam <[email protected]>
> > >>>> To: [email protected]
> > >>>> Cc:
> > >>>> Sent: Friday, May 30, 2014 10:08:14 AM
> > >>>> Subject: Re: [Jprogramming] opportunity to show off jhs or qt
> > >>>>
> > >>>> sleep will halt current thread, not a feature of jqt. One can
> > >>>> use wd'timer' to fire event. Furthermore J802 introduce form timer
> > >>>> for each form, see high-lights.
> > >>>>
> > >>>> Пт, 30 май 2014, Raul Miller написал(а):
> > >>>>> I made the hour hand be a 24 hour hour-hand. To make it the more
> > typical 12
> > >>>>> hour hour-hand, change 2r24p1 2r60p1 2r60p1 to 2r12p1 2r60p1 2r60p1.
> > >>>>>
> > >>>>> And the window freezing issue is a "feature" of jqt. To avoid that
> > issue
> > >>>>> with current versions of jqt, always close (or position) the plot
> > window
> > >>>>> before starting the clock.
> > >>>>>
> > >>>>> Thanks,
> > >>>>>
> > >>>>> --
> > >>>>> Raul
> > >>>>>
> > >>>>>
> > >>>>>
> > >>>>> On Fri, May 30, 2014 at 4:43 AM, Jan-Pieter Jacobs <
> > >>>>> [email protected]> wrote:
> > >>>>>
> > >>>>>> Nice!
> > >>>>>> I tried your code in JQT (on windows 8), some remarks:
> > >>>>>>
> > >>>>>> The hour hand is pointing about the exact oposite direction it
> > should.
> > >>>>>> Somehow, switching windows also causes the plot window to freeze,
> > and J to
> > >>>>>> become unresponsive
> > >>>>>>
> > >>>>>>
> > >>>>>> Jan-Pieter
> > >>>>>>
> > >>>>>>
> > >>>>>> 2014-05-30 3:18 GMT+02:00 Raul Miller <[email protected]>:
> > >>>>>>
> > >>>>>>> Here's another approach (beware of email induced line wrap in
> > definition
> > >>>>>> of
> > >>>>>>> show):
> > >>>>>>>
> > >>>>>>> N=:0.01*i.629
> > >>>>>>> O=: [: j./ 1 2 o./ ]
> > >>>>>>> delay=:6!:3 NB. "sleep"
> > >>>>>>>
> > >>>>>>> show=: [: plot (O N),N*/~0.07 0.11 0.15(*O) 2r24p1 2r60p1
> > 2r60p1*_3{.6!:0
> > >>>>>>> bind ''
> > >>>>>>>
> > >>>>>>> show@delay@1:^:9e9''
> > >>>>>>>
> > >>>>>>> I think this should work with both jqt and the j602 ide.
> > >>>>>>>
> > >>>>>>> Thanks,
> > >>>>>>>
> > >>>>>>> --
> > >>>>>>> Raul
> > >>>>>>>
> > >>>>>>>
> > >>>>>>>
> > >>>>>>> On Thu, May 29, 2014 at 1:39 PM, David Lambert <
> > [email protected]>
> > >>>>>>> wrote:
> > >>>>>>>
> > >>>>>>>> http://rosettacode.org/wiki/Draw_a_clock#J
> > >>>>>>>>
> > >>>>>>>> The next author need only replace the draw dyad, or rewrite the
> > >>>>>>>> contribution.
> > >>>>>>>> x is the current session time, y is the session time when the verb
> > >>>>>>> starts.
> > >>>>>>>>
> > >>>>>>>> round=: [: <. 0.5&+
> > >>>>>>>> PICTURES=: u:16b2190+i.4 NB. arrows
> > >>>>>>>> draw=: [: smoutput PICTURES ((|~ #)~ { [) [: round -
> > >>>>>>>>
> > >>>>>>>>
> > ----------------------------------------------------------------------
> > >>>>>>>> For information about J forums see
> > http://www.jsoftware.com/forums.htm
> > >>>>>>>>
> > >>>>>>>
> > ----------------------------------------------------------------------
> > >>>>>>> For information about J forums see
> > http://www.jsoftware.com/forums.htm
> > >>>>>>>
> > >>>>>>
> > ----------------------------------------------------------------------
> > >>>>>> For information about J forums see
> > http://www.jsoftware.com/forums.htm
> > >>>>>>
> > >>>>>
> > ----------------------------------------------------------------------
> > >>>>> For information about J forums see
> > http://www.jsoftware.com/forums.htm
> > >>>>
> > >>>> --
> > >>>> regards,
> > >>>> ====================================================
> > >>>> GPG key 1024D/4434BAB3 2008-08-24
> > >>>> gpg --keyserver subkeys.pgp.net --recv-keys 4434BAB3
> > >>>> gpg --keyserver subkeys.pgp.net --armor --export 4434BAB3
>
>
>
> >
> >
> >
> > >
> > >
> > >
> > >>
> > >>
> > >>
> > >>>
> > >>>
> > >>>
> > >>>
> > >>>
> > >>>
> > >>>>
> > >>>>
> > >>>>
> > >>>> ----------------------------------------------------------------------
> > >>>> For information about J forums see
> > http://www.jsoftware.com/forums.htm
> > >>>> ----------------------------------------------------------------------
> > >>>> For information about J forums see
> > http://www.jsoftware.com/forums.htm
> > >>>
> > >>> --
> > >>> regards,
> > >>> ====================================================
> > >>> GPG key 1024D/4434BAB3 2008-08-24
> > >>> gpg --keyserver subkeys.pgp.net --recv-keys 4434BAB3
> > >>> gpg --keyserver subkeys.pgp.net --armor --export 4434BAB3
> > >>> ----------------------------------------------------------------------
> > >>> For information about J forums see http://www.jsoftware.com/forums.htm
> > >>> ----------------------------------------------------------------------
> > >>> For information about J forums see http://www.jsoftware.com/forums.htm
> > >>> ----------------------------------------------------------------------
> > >>> For information about J forums see http://www.jsoftware.com/forums.htm
> > >> ----------------------------------------------------------------------
> > >> For information about J forums see http://www.jsoftware.com/forums.htm
> > >> ----------------------------------------------------------------------
> > >> For information about J forums see http://www.jsoftware.com/forums.htm
> > > ----------------------------------------------------------------------
> > > For information about J forums see http://www.jsoftware.com/forums.htm
> > > ----------------------------------------------------------------------
> > > For information about J forums see http://www.jsoftware.com/forums.htm
> > ----------------------------------------------------------------------
> > For information about J forums see http://www.jsoftware.com/forums.htm
> > ----------------------------------------------------------------------
> > For information about J forums see http://www.jsoftware.com/forums.htm
> >
> ----------------------------------------------------------------------
> For information about J forums see http://www.jsoftware.com/forums.htm
> ----------------------------------------------------------------------
> For information about J forums see http://www.jsoftware.com/forums.htm
--
regards,
====================================================
GPG key 1024D/4434BAB3 2008-08-24
gpg --keyserver subkeys.pgp.net --recv-keys 4434BAB3
gpg --keyserver subkeys.pgp.net --armor --export 4434BAB3
----------------------------------------------------------------------
For information about J forums see http://www.jsoftware.com/forums.htm
