You need to understand internet protocols a bit more, before that can work.
Here's a brief overview. Computers hooked to the internet use a software/hardware stack which looks something like this: application layer (supplies/consumes data) transport layer (organizes access to the internet) internet layer (identifies addresses and protocol, makes best effort to deliver) network layer (where all the messy communications happen) electrical layer (computers, wires, antenna, all powered on) physical layer (the hardware itself) https://www.w3.org/People/Frystyk/thesis/TcpIp.html Anyways... host addresses are something for the internet layer. With a host address, you can send packets of information and know that they will usually but not always reach their destination. (And there will be a return address for responses that identifies your machine.) Also, the socket library gives you direct access to the "transport layer". You will almost certainly be using tcp here (which does some carefully engineered work to make it appear that you are sending an arbitrary lengthy sequence of data and receiving an arbitrary length sequence of data -- which is often called a "stream"). For something like stream.data.alpaca.markets/v2/sip you also have a protocol that you will need to be specific about. It's probably http, but might be https or ftp. Once you know the protocol (which in this case would also identify the transport layer "port" that you need to connect to. That would be 80 for http, 443 for https and 21 for ftp), you can look up the details of how that protocol works. And, the protocol is where the path part of that address -- the /v2/sip part -- is used. Anyways, there's a lot of details here. If you want to understand them... some people are capable of picking up the necessary details through self study. But there's also classes which teach this kind of thing. (Nowadays, you'll probably also hear a lot of people saying it's too complicated to learn, and you should use a prepackaged implementation. Whether or not you follow their footsteps or dive in and do it yourself is up to you. That said, it's probably also worth noting that most of the unnecessary complicated stuff falls into disuse after a few years because it's too complicated to learn.) Good luck, -- Raul On Thu, Jul 1, 2021 at 2:44 PM Ed Gottsman <edward.j.gotts...@gmail.com> wrote: > > Hello. I've begun working with the socket library. I can use it to resolve > host names: > > sdgethostbyname 'stream.data.alpaca.markets' > > ┌─┬─┬────────────┐ > │0│2│38.122.35.99│ > └─┴─┴────────────┘ > > Unfortunately, both the code (to the extent that I've been able to understand > it) and the documentation suggest that only a "raw" host can be used to > identify an endpoint. So, for example, there seems to be no way to connect to > > 'stream.data.alpaca.markets/v2/sip' or '38.122.35.99/v2/sip' > > ...which is what I'd like to do. > > I've mucked around trying to hit the DLL more directly--just passing it a > url--but it's a pretty desperate approach and unlikely to succeed. I'd very > much appreciate any ideas the community might have. > > Btw: I checked the nabble archive for an answer and all the emails’ contents > read, “…the author has deleted this message.” So while the nabble search > engine did turn up a lot of socket traffic (which is encouraging), it wasn’t > of much help. > > Thank you. > > Ed > > Sent from my iPad > ---------------------------------------------------------------------- > For information about J forums see http://www.jsoftware.com/forums.htm ---------------------------------------------------------------------- For information about J forums see http://www.jsoftware.com/forums.htm
