Hi Petr, Let me know if you need any further assistance. Note that quite a lot happened in deposit module (+ workflows and bib field which deposit is depend on) since next to pu and the current next is receiving no further updates (it’s to be replaced by PU later this month). So if you’re starting something new, better start with PU (we can naturally help out with migration steps.
Cheers, Lars On 7 May 2014, at 15:11, Petr Brož <[email protected]> wrote: > Thank you, Jiri. > > That repository is too different from what we are running now (next > branch) but I will gladly use it for inspiration. > > Looking at the simplerecord.py found there I have already added steps > prepare_sip, create_recid, finalize_record_sip and upload_record_sip > to our photo deposition workflow and it has started to work. That was > exactly what I needed. > > Regards, > > Petr > > On Wed, May 7, 2014 at 2:12 PM, Jiri Kuncar <[email protected]> wrote: >> Hello Petr, >> >> there is new version of “deposit” module in /pu/ branch in my >> GitHub repository: >> >> <https://github.com/jirikuncar/invenio> >> >> If you would like to try it you will need also “invenio-demosite” >> package from: >> >> <https://github.com/inveniosoftware/invenio-demosite> >> >> Please let me know if you need any further help with >> form customization. >> >> Best regards, >> -- >> Jiří Kunčar >> Software Engineer >> >> CERN, IT Department, Digital Library Technology Section >> Office 513/1-014 >> Tel: +41 22 76 62526 >> Cel: +41 78 850 1517 >> >> On 7. 5. 2014, at 13:30, Petr Brož <[email protected]> wrote: >> >>> We would like to use the new WebDeposit module in the next branch of >>> Invenio but it does not seem to work yet. >>> >>> We have tried the demo photo deposition which seems to be the most >>> simple. We have put just a title in and submitted the deposition and >>> got the "Photo was successfully finished." flash message but no record >>> have been created in invenio and no error has been logged anywhere. >>> >>> I have looked at the deposition definition in photo_metadata.py (I had >>> to remove a trailing comma in the import line first) and the workflow >>> consists only of the render_form step which is probably not >>> sufficient. But the other possible steps described in the WebDeposit >>> documentation do not seem to be implemented. >>> >>> Can you help me making the WebDeposit module work? >>> >>> Thank you, >>> >>> Petr >>
