I can do that , but the pyuno bridge is setup properly for libreoffice only in python3. With 2.7 it gives the error
ERROR: Error in running ** ** **** ['/opt/invenio/bin/inveniounoconv', '-vvv', '-k'] stdout: ** ** **** stderr:unoconv: Cannot find a suitable pyuno library and ** ** python **** binary combination in /usr/lib/libreoffice ERROR: ** ** No module named **** uno ** ** **** unoconv: Cannot find a suitable office installation on your ** ** **** system.ERROR: Please locate your office installation and send ** ** your feedback to: ** ** http://github.com/dagwieers/unoconv/issues **** . ** ** **** In your /etc/sudoers file, you should authorize the www-data ** ** user **** to run /opt/invenio/bin/inveniounoconv as nobody user ** ** as in: **** ** ** **** www-data ALL=(nobody) NOPASSWD: ** ** /opt/invenio/bin/inveniounoconv **** ** ** **** You should then run the following commands: ** ** **** $ sudo mkdir -p /opt/invenio/var/tmp/ooffice-tmp-files ** ** **** $ sudo chown -R nobody /opt/invenio/var/tmp/ooffice-tmp-files ** ** **** $ sudo chmod -R 755 /opt/invenio/var/tmp/ooffice-tmp-files ** ** and doing those does not solve the problem. What is the suggested work around? Thanks&Regards Surendran On Wed, May 14, 2014 at 3:54 PM, Lars Holm Nielsen < [email protected]> wrote: > Hi, > > Ubuntu 14.04 still has Python 2.7 as default? At least on my machine, or > perhaps it's because it's an upgrade. Anyway, Invenio will definitely not > run in Python 3. > > You'll likely need to run ./configure --with-python=/path/to/python2.7 if > your default python is Python 3. > > Note, we striving that all new code going into invenio/pu branch is as > python 3 compatible as possible (using e.g. six library). The main problem > is however still making Invenio use unicode instead of utf8 encoded byte > strings. > > Cheers, > Lars > > > On 14.05.2014 12:08, Surendran Karippadath wrote: > > Hi Tibor, > > Unable to carryout the upgrade from 1.1.2 to 1.1.3. > $ tar xvfz invenio-1.1.3.tar.gz > $ cd invenio-1.1.3 > $ sudo rsync -a /opt/invenio/etc/ /opt/invenio/etc.OLD/ > $ sh /opt/invenio/etc/build/config.nice > checking for a BSD-compatible install... /usr/bin/install -c > checking whether build environment is sane... yes > checking for a thread-safe mkdir -p... /bin/mkdir -p > checking for gawk... gawk > checking whether make sets $(MAKE)... yes > checking whether make supports nested variables... yes > checking whether UID '1000' is supported by ustar format... yes > checking whether GID '1000' is supported by ustar format... yes > checking how to create a ustar tar archive... gnutar > checking for a sed that does not truncate output... /bin/sed > checking whether NLS is requested... yes > checking for msgfmt... /usr/bin/msgfmt > checking for gmsgfmt... /usr/bin/msgfmt > checking for xgettext... /usr/bin/xgettext > checking for msgmerge... /usr/bin/msgmerge > checking for style of include used by make... GNU > checking for gcc... gcc > checking whether the C compiler works... yes > checking for C compiler default output file name... a.out > checking for suffix of executables... > checking whether we are cross compiling... no > checking for suffix of object files... o > checking whether we are using the GNU C compiler... yes > checking whether gcc accepts -g... yes > checking for gcc option to accept ISO C89... none needed > checking whether gcc understands -c and -o together... yes > checking dependency style of gcc... none > checking build system type... i686-pc-linux-gnu > checking host system type... i686-pc-linux-gnu > checking for ld used by gcc... /usr/bin/ld > checking if the linker (/usr/bin/ld) is GNU ld... yes > checking for shared library run path origin... done > checking how to run the C preprocessor... gcc -E > checking for grep that handles long lines and -e... /bin/grep > checking for egrep... /bin/grep -E > checking for CFPreferencesCopyAppValue... no > checking for CFLocaleCopyCurrent... no > checking for GNU gettext in libc... yes > checking whether to use NLS... yes > checking where the gettext function comes from... libc > checking for mysql... /usr/bin/mysql > checking for python... /usr/bin/python > checking for OpenOffice.org Python binary... /usr/bin/python > checking for required Python modules... File "./configure-tests.py", > line 45 > print "\n\nInstallation aborted." > > > Is it because of python3? > This install is taking place in Ubuntu-14.04. > > Thank you for your attention. > > Best Regards > Surendran > > > On Tue, Feb 25, 2014 at 7:36 PM, Tibor Simko <[email protected]> wrote: > >> -------------------------------------------------------------------- >> Invenio v1.1.3 is released >> February 25, 2014 >> http://invenio-software.org/ >> -------------------------------------------------------------------- >> >> Invenio v1.1.3 was released on February 25, 2014. >> >> This stable release contains a number of minor fixes and improvements. >> It is recommended to all Invenio sites using v1.1.2 or previous stable >> release series (v0.99, v1.0). >> >> What's new: >> ----------- >> >> *) BatchUploader: rights to ::1 for robot upload; avoid >> tempfile.tempdir redefinition (#1594) >> >> *) BibCatalog: no newlines in subject for RT plugin >> >> *) BibDocFile: RHEL6 magic bindings support (#1466) >> >> *) BibFormat: fix for BibTeX regression tests; better BibTeX title >> and collaboration >> >> *) BibRank: temporary file storage in CFG_TMPDIR (#1594) >> >> *) BibSword: author MARC tag definition fix >> >> *) BibUpload: FFT replace warning in guide >> >> *) I18N: PO file update for the release of v1.1.3; PO file update for >> the release of v1.0.6; PO file update for the release of v0.99.9; >> collection demo names for new translations >> >> *) OAIHarvest: for for bad exception handling >> >> *) OAIRepository: optional support for --notimechange >> >> *) Travis CI: initial release of configuration >> >> *) WebSearch: nonexisting record API test case fix (#1692); correct >> record sums from hosted colls (#1651); space between records in >> MARC HTML; fix for BibTeX regression tests; field-filtered MARCXML >> API output (#1591); more complete API regression test suite; >> get_fieldvalues_alephseq_like() utils; asciification of `oe` >> grapheme (#1582); bug fix for SPIRES date math search >> >> *) WebSession: fix mail cookie expiration (#1596) >> >> *) WebSubmit: fix for typo in Shared_Functions; optional pdftk >> regression tests >> >> *) dbquery: closes redundant connection >> >> *) git: addition of compile to gitignore; new entry in gitignore >> >> *) global: language value always in link URLs >> >> *) installation: pip requirement version updates; pip requirements; >> no user prompt for warnings; empty Travis configuration; location >> of jquery-1.7.1.min.js; location of flot; information about >> unidecode; fix autotools rsync instructions >> >> *) intbitset: no crash when intbitset is on rhs (#1287) >> >> *) inveniocfg: fix for mod_headers >> >> *) kwalitee: list comprehensions instead of lambdas; compatibility >> with pylint 1.0.0 >> >> Download: >> --------- >> >> <http://invenio-software.org/download/invenio-1.1.3.tar.gz> >> <http://invenio-software.org/download/invenio-1.1.3.tar.gz.md5> >> <http://invenio-software.org/download/invenio-1.1.3.tar.gz.sig> >> >> Installation notes: >> ------------------- >> >> Please follow the INSTALL file bundled in the distribution tarball. >> >> Upgrade notes: >> -------------- >> >> Please proceed as follows: >> >> a) Stop your bibsched queue and your Apache server. >> >> b) Install the update: >> >> $ tar xvfz invenio-1.1.3.tar.gz >> $ cd invenio-1.1.3 >> $ sudo rsync -a /opt/invenio/etc/ /opt/invenio/etc.OLD/ >> $ sh /opt/invenio/etc/build/config.nice >> $ make >> $ make check-upgrade >> $ sudo -u www-data make install >> $ sudo rsync -a /opt/invenio/etc.OLD/ \ >> --exclude invenio-autotools.conf \ >> /opt/invenio/etc/ >> # Note: if you are upgrading from previous stable release >> # series (v0.99 or v1.0), please don't rsync but diff, in order >> # to inspect changes and adapt your old configuration to the >> # new v1.1 release series. >> $ sudo -u www-data /opt/invenio/bin/inveniocfg --update-all >> $ sudo -u www-data /opt/invenio/bin/inveniocfg --upgrade >> >> c) Restart your Apache server and your bibsched queue. >> >> d) If your records may contain `oe` UTF-8 graphemes, please schedule >> reindexing of concerned indexes at a convenient time, for example: >> >> $ sudo -u www-data /opt/invenio/bin/bibindex -w title -f100000 -R >> >> - end of file - >> >> > > > -- > Surendran K.K. > 020-27298293 > > > > -- > Lars Holm Nielsen > CERN, IT Department, Collaboration & Information Serviceshttp://zenodo.org | > Tel: +41 22 76 79182 | Cel: +41 76 672 8927 > > -- Surendran K.K. 020-27298293
