Hi Dario, thank you for the clarifications. However, what do you mean with "building the Chrono library correctly"?
Il giorno mer 18 ott 2023 alle ore 11:50 Dario Mangoni < [email protected]> ha scritto: > Hi Davide, > the reason for this error is that you provided a path for Irrlicht that > contains backslashes '\'. You need to replace them with forward slashes '/' > since the backslash is intended as an escape character. > Before building any project (i.e. using the 'template_project' that you > can find in the repo) make sure to build the Chrono library properly. > > I think that after this fix you should be good to go. > > Dario > > Il giorno mercoledì 18 ottobre 2023 alle 10:30:47 UTC+2 > [email protected] ha scritto: > >> Hi Dario, >> thank you very much for the suggestion! I followed your indications and >> now it seems to work. Anyway, I provide to you the right CMake log (I >> copied and pasted in the *Cmake log.txt* file just to be more tidy) and >> *CMakeCache.txt* file. >> However, i tried to build a project following the guide on the website, >> but when i configure Cmake it gives me the following error: >> CMake Error at >> C:/Users/USER/Documents/chrono_build/cmake/chrono-config.cmake:298 (list): >> >> Syntax error in cmake code at >> >> C:/Users/USER/Documents/chrono_build/cmake/chrono-config.cmake:298 >> >> when parsing string >> >> C:\Users\USER\Documents\libraries\irrlicht-1.8.5/include >> >> Invalid character escape '\U'. >> Call Stack (most recent call first): >> CMakeLists.txt:65 (find_package) >> I apologize for my insistence, but I have to do my master thesis using >> this program and I'm trying to figure out how to use it properly. >> Thank you for your support! >> >> >> Il giorno mar 17 ott 2023 alle ore 23:11 Dario Mangoni < >> [email protected]> ha scritto: >> >>> Hi Davide, >>> probably I misguided you: by sending the CMake log I meant to copy and >>> paste all the text that you find below the >>> *Configure|Generate|OpenProject* buttons. >>> Moreover, it would be great if you can also attach the *CMakeCache.txt* >>> file that you can find in your *chrono_build *folder. >>> >>> Anyway, few suggestions: >>> >>> - except if you really need to cosimulate vehicles or other very >>> complex/heavy simulation *don't worry about the missing MPI at all*: >>> the warning you are getting shouldn't compromise the basic >>> functionalities >>> of Chrono core modules; >>> - I would recommend to update Irrlicht to 1.8.4 >>> - did you intentionally unflagged BUILD_SHARED_LIBS? By default it >>> should be set and for the time being *we do not recommend to unflag >>> it* except if you really know what you are doing and/or you strongly >>> need Chrono as static library >>> >>> >>> Il giorno martedì 17 ottobre 2023 alle 17:55:44 UTC+2 >>> [email protected] ha scritto: >>> >>>> Hi Dario, >>>> I am an absolute beginner and I apologise if I have missed something >>>> obvious. I followed the installation as you mentioned in the link, but i'm >>>> having some troubles: >>>> - Although i installed Microsoft MPI, it doesn't found it during the >>>> installation. It gives me the following message: CMake Warning at >>>> src/chrono_vehicle/cosim/CMakeLists.txt:9 (message): >>>> >>>> Chrono::Vehicle cosimulation support requires MPI, but MPI not found; >>>> >>>> - I wrote the correct directory for the Irrlicht library, but it gives >>>> me the following warning: CMake Warning at >>>> src/chrono_irrlicht/CMakeLists.txt:144 (TARGET_LINK_LIBRARIES): >>>> >>>> Target "ChronoEngine_irrlicht" requests linking to >>>> directory "C:/Users/USER/Documents/libraries/irrlicht-1.8.2". Targets may >>>> link only to libraries. CMake is dropping the item. >>>> >>>> In the CMake log, I flagged the same module proposed in the >>>> installation guide. >>>> >>>> Thank you in advance for your help! >>>> Il giorno martedì 17 ottobre 2023 alle 10:51:27 UTC+2 >>>> [email protected] ha scritto: >>>> >>>>> Hi Davide, >>>>> the wording "I downloaded the tutorial demo_CH....." sounds a little >>>>> awkward to me: you cannot download just a single file and compile it. So >>>>> maybe it's really a stupid question but: did you compile the Chrono >>>>> library >>>>> first? >>>>> Did you follow the install instructions? >>>>> https://api.projectchrono.org/development/tutorial_install_chrono.html >>>>> If so, can you send us the CMake log? >>>>> >>>>> Dario >>>>> >>>>> P.S. the CMake log is the one at the bottom here: >>>>> [image: Window-20231017-105049.png] >>>>> Il giorno martedì 17 ottobre 2023 alle 10:35:47 UTC+2 >>>>> [email protected] ha scritto: >>>>> >>>>>> Hi, >>>>>> I've been using the program for a couple of weeks, and I'm still >>>>>> quite inexperienced. I downloaded the tutorial "demo_CH_buildsystem.cpp" >>>>>> but when I try to compile it in Visual Studio, it gives me the following >>>>>> error: 'ChLinkMotorRotationSpeed.h': No such file or directory. I can't >>>>>> understand the reason for it although i've included it. Could someone >>>>>> help >>>>>> me? >>>>>> >>>>>> >>>>>> -- >>> You received this message because you are subscribed to the Google >>> Groups "ProjectChrono" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to [email protected]. >>> To view this discussion on the web visit >>> https://groups.google.com/d/msgid/projectchrono/79a0a961-70ea-4b71-a541-8328bb457568n%40googlegroups.com >>> <https://groups.google.com/d/msgid/projectchrono/79a0a961-70ea-4b71-a541-8328bb457568n%40googlegroups.com?utm_medium=email&utm_source=footer> >>> . >>> >> -- > You received this message because you are subscribed to the Google Groups > "ProjectChrono" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/projectchrono/0128024f-a561-454a-ab8d-33923aab1aebn%40googlegroups.com > <https://groups.google.com/d/msgid/projectchrono/0128024f-a561-454a-ab8d-33923aab1aebn%40googlegroups.com?utm_medium=email&utm_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "ProjectChrono" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/projectchrono/CAOQ4fRXEw5vVx0va4rzgo8T2cp%3DEh2yNHaG0sOVAGZ1OGYk0mg%40mail.gmail.com.
