Thank you so much, Professor. I have tested the code with some other initial spacing values and it seems that the code starts working again when I set my initial spacing value to 1.5*particle diameter (originally, the initial spacing value was set to be 0.0033m while the particle diam is 0.003m). It would still be helpful to look into why the code froze and no errors were outputted whenever you have time for it.
Thank you so much for all the help, On Sunday, November 12, 2023 at 1:00:57 PM UTC-7 Dan Negrut wrote: > Mohammad – we’ll try to take a look, things are backed up, hopefully we > can help in some way… > > Dan > > --------------------------------------------- > > Bernard A. and Frances M. Weideman Professor > > NVIDIA CUDA Fellow > > Department of Mechanical Engineering > > Department of Computer Science > > University of Wisconsin - Madison > > 4150ME, 1513 University Avenue > > Madison, WI 53706-1572 > > 608 772 0914 <(608)%20772-0914> > > http://sbel.wisc.edu/ > > http://projectchrono.org/ > > --------------------------------------------- > > > > *From:* [email protected] <[email protected]> *On > Behalf Of *Mohammad Wasfi > *Sent:* Sunday, November 12, 2023 1:42 AM > *To:* ProjectChrono <[email protected]> > *Subject:* [chrono] FSI module > > > > Hello, > > > > I am trying to create a simulation based on the single-wheel demo. In my > simulation, I am using a screw instead of a wheel. I started with changing > the way the material properties are imported into the simulation. > Everything worked fine as shown in the attached video. However, now, I am > trying to reduce particle diameter ( as well as initial spacing). The > simulation seems to freeze at the beginning and no error is printed. I was > wondering if more insight could be provided into why the simulation freezes > when reducing the particle diameter with no error printed. > > > > Thank you in advance for your help, > > -- > You received this message because you are subscribed to the Google Groups > "ProjectChrono" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/projectchrono/239386b1-d155-40a8-bf1c-6999db12484fn%40googlegroups.com > > <https://groups.google.com/d/msgid/projectchrono/239386b1-d155-40a8-bf1c-6999db12484fn%40googlegroups.com?utm_medium=email&utm_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "ProjectChrono" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/projectchrono/9ad23260-42a9-45c6-a92e-74a2121b93f5n%40googlegroups.com.
