Hi Gianni, That's good to know. I'd like to note that depending on the model of your GPU and the problem you are running, it could be natural that the actual consumption is a bit far from the power limit. But as you said, it could also be related to the driver. DEME does not touch the driver so I would say if you don't update the driver out of the CUDA installation supported range, then it should be fine.
Thank you, Ruochun On Friday, January 10, 2025 at 6:28:54 AM UTC+8 eldest...@gmail.com wrote: > Hi Ruochun, > thank you again now everything is working fine! > However, I have another question related to the nvidia driver. For now, I > have the 560 version and I have noticed a power cap on my GPU of 35W > against the 110W limit specified by the manufacturer. Looking in some > forums I understood that the problem may be related to the driver itself, > therefore I want to update it. Do you know if this will cause any problem > to DEME? > > Thank you again. > > Gianni > > Il giorno giovedì 9 gennaio 2025 alle 11:54:59 UTC+1 Ruochun Zhang ha > scritto: > >> Hi Gianni, >> >> The error you saw is about an outdated API. *UpdateStepSize *now needs a >> number as an argument. I am surprised I didn't spot it when I tried it. >> It's certainly not a big problem though: I pushed a new version of >> chrono-project, could you please do a pull and rebuild the project? Thank >> you for the catch and for testing it! >> >> Ruochun >> >> On Thursday, January 9, 2025 at 8:33:31 AM UTC+8 eldest...@gmail.com >> wrote: >> >>> Hi Ruochun, >>> >>> first of all thank you for your patience. I did more attempts and in the >>> end, I saw that the problem was due to the fact that I cloned the main >>> branch of chrono-projects. Instead, if I clone the feature/DEME branch the >>> prompt "ENABLE_DEME_TESTS" appears and I can link DEME against Chrono. >>> However, while building the following errors appear. >>> >>> [image: Screenshot From 2025-01-09 01-27-19.png] >>> >>> I left as active only the option to compile the scripts where DEME and >>> Chrono are used together since in Chrono I have only Core, Vehicle and >>> Multicore installed so I didn't want to trigger some kind of error related >>> to other missing modules. To be clearer, these are the screenshots showing >>> CMAKE settings and outputs during configuration. >>> >>> [image: Screenshot From 2025-01-09 01-20-39.png] >>> >>> [image: Screenshot From 2025-01-09 01-21-43.png] >>> >>> [image: Screenshot From 2025-01-09 01-21-57.png] >>> >>> [image: Screenshot From 2025-01-09 01-22-09.png] >>> >>> [image: Screenshot From 2025-01-09 01-22-36.png] >>> >>> Thank you again. >>> >>> Gianni >>> >>> Il giorno mercoledì 8 gennaio 2025 alle 20:53:17 UTC+1 Ruochun Zhang ha >>> scritto: >>> >>>> Hi Gianni, >>>> >>>> Can you post a screenshot of the Cmake UI after you "ENABLE_PROJECTS" >>>> and re-generate? If DEME-DIR is not shown, I'd like to know what is shown. >>>> Besides, if there is any warning or error in the process, please show them >>>> too. >>>> >>>> Ruochun >>>> >>>> On Thursday, January 9, 2025 at 2:09:38 AM UTC+8 eldest...@gmail.com >>>> wrote: >>>> >>>>> Hi, >>>>> I am trying to compile DEM-Engine as a Chrono library on my pc running >>>>> a Linux system on Ubuntu 24.10. I have already compiled both Project >>>>> Chrono >>>>> (with CUDA toolkit 12.3) and DEM-Engine (with CUDA toolkit 12.6). I am >>>>> following the instructions given on the website to complete this passage >>>>> but I am stuck at the point where I have to set the field DEME-DIR. In >>>>> fact, this field does not appear even though I have put "ENABLE_PROJECTS" >>>>> to ON therefore I am unable to link DEM-Engine with Chrono. >>>>> >>>>> Could you please give me some guidance about how to resolve the >>>>> problem? >>>>> Plus, do I need CUDA 12.3 or 12.6 to complete this process? >>>>> >>>>> Thank you in advance for your assistance and kindness. >>>>> >>>>> Gianni >>>>> >>>> -- You received this message because you are subscribed to the Google Groups "ProjectChrono" group. To unsubscribe from this group and stop receiving emails from it, send an email to projectchrono+unsubscr...@googlegroups.com. To view this discussion visit https://groups.google.com/d/msgid/projectchrono/80c22f75-cb31-42ad-934f-81fbd4771cc5n%40googlegroups.com.
