Thanks a ton. That worked. I had tried dropping the last 0 with the OID number and the OID name with the last 0. Both didn't work, but the OID name without the last 0 worked. Thanks you very much.
On Monday, 14 September 2020 at 12:51:41 UTC+5:30 [email protected] wrote: > Drop the last 0. > > The easier thing to do is use the OID name, rather than the OID number in > the generator config. This avoids typos like this. > > modules: > XPPC-MIB: > walk: > - upsThreePhaseOutputVoltageR > > > On Mon, Sep 14, 2020 at 8:42 AM sabarish narayanan <[email protected]> > wrote: > >> >> Hi, >> I am trying to generate snmp.yml by using the generator. This is my >> generator file :- >> >> modules: >> XPPC-MIB: >> walk: >> - .1.3.6.1.4.1.935.1.1.1.8.3.2.0 >> version: 3 >> max_repetitions: 25 >> retries: 3 >> timeout: 10s >> auth: >> username: ******** >> security_level: authNoPriv >> password: ********* >> auth_protocol: MD5 >> >> I am getting the following error :- >> >> level=info ts=2020-09-14T06:12:47.382Z caller=net_snmp.go:142 >> msg="Loading MIBs" from=$HOME/.snmp/mibs:/usr/share/snmp/mibs >> level=info ts=2020-09-14T06:12:47.530Z caller=main.go:52 msg="Generating >> config for module" module=XPPC-MIB >> level=error ts=2020-09-14T06:12:47.538Z caller=main.go:130 msg="Error >> generating config netsnmp" err="cannot find oid >> '.1.3.6.1.4.1.935.1.1.1.8.3.2.0' to walk" >> >> If I try snmptranslate, it works :- >> >> snmptranslate -mALL .1.3.6.1.4.1.935.1.1.1.8.3.2.0 >> XPPC-MIB::upsThreePhaseOutputVoltageR.0 >> >> snmpwalk to that oid also gives the value of the oid :- >> >> snmpwalk -l authNoPriv -u ******** -a MD5 -A ********* XX.XX.XX.XX >> .1.3.6.1.4.1.935.1.1.1.8.3.2.0 >> SNMPv2-SMI::enterprises.935.1.1.1.8.3.2.0 = INTEGER: 2323 >> >> So I'm pretty sure that netsnmp is working fine. >> The XPPC-MIB.txt file is in /usr/share/snmp/mibs. >> >> I'm working on Centos 8. >> >> What am I doing wrong? Any help is appreciated. >> Thanks. >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Prometheus Users" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/prometheus-users/2d3d4933-6f2a-499c-a1ac-215ebb649de7n%40googlegroups.com >> >> <https://groups.google.com/d/msgid/prometheus-users/2d3d4933-6f2a-499c-a1ac-215ebb649de7n%40googlegroups.com?utm_medium=email&utm_source=footer> >> . >> > -- You received this message because you are subscribed to the Google Groups "Prometheus Users" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/prometheus-users/b36df16e-f26a-444a-8e98-b3c4c4b4f843n%40googlegroups.com.
