At 11:42 05.02.01 +0100, you wrote:
>The power objects in schematic are not elegant.
>I'd like to setup a list of objects for my design to choose from:
>+5V_bar
>+3.3V_bar
>+15V_arraow
>-5.2V_circle
>GND_dig
>GND_analog
>Earth
>....

You can change this quite easy. (Customize|Toolbars|Wiring Tools)
The bitmaps of the buttons are in the directory "Design Explorer 99 
SE\System\Buttons" and can be copied and edited. I've changed ALL the 
buttons. E.g. grounds are blue and VCC's are red. This is common, at least 
in Europe, isn't it?


>As it is now, GND looks the same though they can named GND_dig and GND_analog.
>I should be able to select by image and the image shows what it means.
>
>
>The vias in pcb are not nicely implemented.
>select connected copped and assign another net leaves the vias to be
>assigned manually. They seem not to be counted as copper.

They do, but the dialog is different for tracks and vias, so if you 
globally change the nets of tracks, you only change the tracks. You have to 
change the vias, pads, fills, arcs,... separatly.

Edi


>Rene
>--
>Ing.Buero R.Tschaggelar - http://www.ibrtses.com



++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+  IH electronic                +  Phone:   ++41 52 320 90 00  +
+  Edi Im Hof                   +  Fax:     ++41 52 320 90 04  +
+  Doernlerstrasse 1, Sulz      +  URL:     http://www.ihe.ch  +
+  CH-8544 Rickenbach-Attikon   +  E-Mail:  [EMAIL PROTECTED]   +
+  Switzerland                  +                              +
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++



* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
*  This message sent by: PROTEL EDA USERS MAILING LIST
*
*  Use the "reply" command in your email program to
*  respond to this message.
*
*  To unsubscribe from this mailing list use the form at
*  the Association web site. You will need to give the same
*  email address you originally used to subscribe (do not
*  give an alias unless it was used to subscribe).
*
*  Visit http://www.techservinc.com/protelusers/subscrib.html
*  to unsubscribe or to subscribe a new email address.
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *

________________________________________________________

To leave the EDAFORUM discussion list, send a email with
'leave edaforum' in the body to '[EMAIL PROTECTED]'

More Information : http://www.dolist.net

Reply via email to