Edi Im Hof wrote:
> 
> At 11:42 05.02.01 +0100, you wrote:
> >The power objects in schematic are not elegant.
> >I'd like to setup a list of objects for my design to choose from:
> >+5V_bar
> >+3.3V_bar
> >+15V_arraow
> >-5.2V_circle
> >GND_dig
> >GND_analog
> >Earth
> >....
> 
> You can change this quite easy. (Customize|Toolbars|Wiring Tools)
> The bitmaps of the buttons are in the directory "Design Explorer 99
> SE\System\Buttons" and can be copied and edited. I've changed ALL the
> buttons. E.g. grounds are blue and VCC's are red. This is common, at least
> in Europe, isn't it?

Thanks, I didn't know that. And I'd never have found it.
This leads to another subject : consistency.
View/Toolbars/customize is not the place I'd expect it.

> >The vias in pcb are not nicely implemented.
> >select connected copped and assign another net leaves the vias to be
> >assigned manually. They seem not to be counted as copper.
> 
> They do, but the dialog is different for tracks and vias, so if you
> globally change the nets of tracks, you only change the tracks. You have to
> change the vias, pads, fills, arcs,... separatly.
> 

Selected copper is everything. change selection means the selected.
It is track, via, arc and not just one of them.

Rene



* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
*  This message sent by: PROTEL EDA USERS MAILING LIST
*
*  Use the "reply" command in your email program to
*  respond to this message.
*
*  To unsubscribe from this mailing list use the form at
*  the Association web site. You will need to give the same
*  email address you originally used to subscribe (do not
*  give an alias unless it was used to subscribe).
*
*  Visit http://www.techservinc.com/protelusers/subscrib.html
*  to unsubscribe or to subscribe a new email address.
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *

________________________________________________________

To leave the EDAFORUM discussion list, send a email with
'leave edaforum' in the body to '[EMAIL PROTECTED]'

More Information : http://www.dolist.net

Reply via email to