At 01:57 PM 2/12/01 -0800, Andrew W. Riley III wrote:

>Mr. Lomax,
>
>Yes, it is reproducible.  The reset option has no effect.
>I have tried every option available to me even though it is only one sheet.

Still unstated is the complete set of Annotate settings. However, at this 
point I'd be happy to take a look at the schematic. I'm assuming that a 
copy of the schematic also displays the same behavior.


>Drew
>
> > -----Original Message-----
> > From: TSListServer [mailto:[EMAIL PROTECTED]]On
> > Behalf Of Abd ul-Rahman Lomax
> > Sent: Thursday, February 08, 2001 11:13 PM
> > To: Multiple recipients of list proteledausers
> > Subject: Re: [PROTEL EDA USERS]: Annotating Schematic
> >
> >
> > At 09:02 AM 2/8/01 -0800, Andrew W. Riley III wrote:
> >
> > >I have a one-page schematic that I created mostly by block copying parts
> > >of other 99SE schematics.  Some of the reference designators are
> > >duplicates, others are new with question marks and so-forth.  I
> > have tried
> > >to reset designators and then annotate, and I also tried to annotate
> > >all.  All that happens is that I get a blank report file and none of the
> > >designators have changed.
> > >If I export the schematic and the library that I created into 98
> > >schematic, the above annotate functions work fine, I then import the
> > >schematic back to 99SE and all is well.
> > >Is there something that I am doing wrong in 99SE?
> > >The above is both with SP5 and SP6.
> >
> > If you take the original file and try again, does it fail again? I.e., is
> > it reproducible? If so, does using the reset option have no effect on
> > existing designators?
> >
> > What options are set for the Annotate Tool, including the Advanced tab?
>
>
>
>* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
>*  This message sent by: PROTEL EDA USERS MAILING LIST
>*
>*  Use the "reply" command in your email program to
>*  respond to this message.
>*
>*  To unsubscribe from this mailing list use the form at
>*  the Association web site. You will need to give the same
>*  email address you originally used to subscribe (do not
>*  give an alias unless it was used to subscribe).
>*
>*  Visit http://www.techservinc.com/protelusers/subscrib.html
>*  to unsubscribe or to subscribe a new email address.
>* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *

[EMAIL PROTECTED]
Abdulrahman Lomax
P.O. Box 690
El Verano, CA 95433



* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
*  This message sent by: PROTEL EDA USERS MAILING LIST
*
*  Use the "reply" command in your email program to
*  respond to this message.
*
*  To unsubscribe from this mailing list use the form at
*  the Association web site. You will need to give the same
*  email address you originally used to subscribe (do not
*  give an alias unless it was used to subscribe).
*
*  Visit http://www.techservinc.com/protelusers/subscrib.html
*  to unsubscribe or to subscribe a new email address.
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *

________________________________________________________

To leave the EDAFORUM discussion list, send a email with
'leave edaforum' in the body to '[EMAIL PROTECTED]'

More Information : http://www.dolist.net

Reply via email to