Hello David,

            I would send you a file with my problem, but if you check some
of the emails that come in after, Mr.Lomax explains why  the ERC would have
changed the component.
After I fixed that, the ERC hasn't changed the symbols in my schematic.

Very Kind Regards,

Bryan Bernesi


-----Original Message-----
From: David Cary <[EMAIL PROTECTED]>
To: Multiple recipients of list proteledausers
<[EMAIL PROTECTED]>
Date: Monday, February 12, 2001 6:03 PM
Subject: [PROTEL EDA USERS]: Why does symbol change shape ?


>
>
>
>
>Dear Bryan Bernesi,
>
>I run ERC all the time ("Tools | ERC | OK"), and I've never seen it change
any
>of my schematic symbols. Would you be so kind as to help me reproduce this
>problem ? You could put a file that demonstrates this weird behavior in
>  http://groups.yahoo.com/group/protel-users/files/
>...
>
>I recommend that all newbies read the FAQ.
>  http://groups.yahoo.com/group/protel-users/files/protelfaq.html
>
>"Bryan Bernesi" <[EMAIL PROTECTED]> on 2001-02-12 02:21:53 PM
>>As for the other two questions I asked earlier do I have to re-ask them in
a
>>different Emails with different subjects; or will someone be able to
answer
>>directly from my first Email?
>
>"Bryan Bernesi" <[EMAIL PROTECTED]> on 2001-02-12 09:29:28 AM
>>On another note, sometimes when I run the ERC some of my symbols are
changed
>>in my schematic, i.e.
>>I have a PNP transistor (2N2904 symbol labeled as a TIP125) that changes
to
>>a different transistor symbol (taken from ????), or a LED (a created
symbol)
>>that changes back to the standard LED symbol (found in miscellaneous
>>devices.lib) but the LED symbol does not change in all 24 modules?!?!?!?!
>>
>>Can anyone tell me what I'm doing wrong, or what I have not setup
properly??
>
>
>
>
>* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
>*  This message sent by: PROTEL EDA USERS MAILING LIST
>*
>*  Use the "reply" command in your email program to
>*  respond to this message.
>*
>*  To unsubscribe from this mailing list use the form at
>*  the Association web site. You will need to give the same
>*  email address you originally used to subscribe (do not
>*  give an alias unless it was used to subscribe).
>*
>*  Visit http://www.techservinc.com/protelusers/subscrib.html
>*  to unsubscribe or to subscribe a new email address.
>* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *



* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
*  This message sent by: PROTEL EDA USERS MAILING LIST
*
*  Use the "reply" command in your email program to
*  respond to this message.
*
*  To unsubscribe from this mailing list use the form at
*  the Association web site. You will need to give the same
*  email address you originally used to subscribe (do not
*  give an alias unless it was used to subscribe).
*
*  Visit http://www.techservinc.com/protelusers/subscrib.html
*  to unsubscribe or to subscribe a new email address.
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *

________________________________________________________

To leave the EDAFORUM discussion list, send a email with
'leave edaforum' in the body to '[EMAIL PROTECTED]'

More Information : http://www.dolist.net

Reply via email to