OOPS.

I just remembered... this will not work as I wrote it.

This will cause all of your servers to disappear becuase Protel does not
re-write the server info back into the file.

After removing the Client99SE.INI you will have to run the repair option
from your Protel99SE CD Setup to replace the file.

Sorry about that... guess I better double-check my suggestions...  it
appears my memory is a bit fuzzy on some of this stuff already.

----------------------------------------------------------------------
Colby Siemer                        ** Custom Battery Chargers
                                           ** Custom Power Supplies
PowerStream Technology       ** Custom UPS
140 S. Mountainway Drive      ** Custom DC/DC Converters
Orem Utah 84058                  ** Power management electronics for OEMs

http://www.PowerStream.com

----- Original Message -----
From: "Colby - PowerStream" <[EMAIL PROTECTED]>
To: "Protel EDA Forum" <[EMAIL PROTECTED]>
Sent: Tuesday, March 27, 2001 9:51 AM
Subject: Re: [PEDA] Floating licenses dissapearing: was "Searching Network
for Floating License"


> Doug,
>
> Long and Short version things to try...
>
> Short version first.  Close Protel, Delete/Rename the Client99SE.INI(in
> Windows or Winnt directory), open Protel check access codes and install
any
> that are missing, Close Protel... repeat for each workstation.
>
> Long Version...
>
> Here is what I would try. Hopefully this will help.  I don't remember ever
> seeing the Protel software remove access codes... so I would suspect maybe
> some damage or write protection on your Client99SE.INI in the windows
> directory.
>
> Remove all access codes from the Protel installations one at a time then
> close the program.
>
> While Protel is closed... Delete or Rename the Client99SE.INI from the
> Windows/Winnt directory for each workstation.
>
> When all codes are removed and the INI is deleted or renamed for each
> workstation then..
>
> Load Protel 99 SE and re-enter your access codes manually then close
Protel
> and it should write this new info to a new Client99SE.INI... do this for
> each workstation.
>
> Hopefully that may clean out the issue with codes disappearing.
>
> Make sure you have full read/write access to your Windows or Winnt
directory
>
> ----------------------------------------------------------------------
> Colby Siemer                        ** Custom Battery Chargers
>                                            ** Custom Power Supplies
> PowerStream Technology       ** Custom UPS
> 140 S. Mountainway Drive      ** Custom DC/DC Converters
> Orem Utah 84058                  ** Power management electronics for OEMs
>
> http://www.PowerStream.com
>
>
> ----- Original Message -----
> From: <[EMAIL PROTECTED]>
> To: "Protel EDA Forum" <[EMAIL PROTECTED]>
> Sent: Tuesday, March 27, 2001 9:07 AM
> Subject: [PEDA] Floating licenses dissapearing: was "Searching Network for
> Floating License"
>
>
> >
> >
> > From: Douglas Jensen
> >
> > In a possibly related thread, I have had protel REMOVE licenses from my
> > list of unlock-codes shown in the security window.
> >
> > Originally, I installed only single licenses on single machines (before
> the
> > check boxes for transmit and recieve where removed in an SP sometime).
> Now
> > I have to install all licenses on all machines to have things work at
all.
> > I installed each of 5 codes on 5 different machines.  Now most machines
> > have four or three licenses available - the protel app is removing
numbers
> > from the lists on machines - I have to re-enter the codes to get
everyone
> > running again (or more accurately to avoid the 'you are running more
> copies
> > than you have licenses for' message.)
> >
> > Has anyone else experienced this?  Any solutions?  Protel has been
trying
> > to be helpful, but I've been following their instructions with little
> > result.
> >
> > Thanks,
> > DJ
>
>


* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* To post a message: mailto:[EMAIL PROTECTED]
*
* To join or leave this list visit:
* http://www.techservinc.com/protelusers/subscrib.html
*                      - or email -
* mailto:[EMAIL PROTECTED]?body=leave%20proteledaforum
*
* Contact the list manager:
* mailto:[EMAIL PROTECTED]
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *

Reply via email to