Hubert,
        you may want to really think about how to word your question. The
present question makes no sense to me, nor others I suspect. If your English
is very poor, try one of the other common European languages, we have
members from different countries in Europe who will answer you given a
chance to respond to your message.

        This sounds like you are just trying to connect two pins with a
'trace' but getting DRC errors! If this is the case then I believe that you
need to read the basics of the manual because it sounds as if you have no
netlist information and are trying to freehand draw a PCB design. It is not
as simple as that, especially if you want to use the DRC functions.

Sincerely,

Brad Velander
Lead PCB Design
Norsat International Inc.
#100 - 4401 Still Creek Dr.,
Burnaby, B.C., Canada.
V5C6G9.
voice: (604) 292-9089 (direct line)
fax:    (604) 292-9010
email: [EMAIL PROTECTED]
www: www.norsat.com


> -----Original Message-----
> From: David Cary [mailto:[EMAIL PROTECTED]]
> Sent: Tuesday, April 03, 2001 10:20 AM
> To: Protel EDA Forum
> Subject: Re: [PEDA] PCB printed self
> 
> 
> Dear Hubert,
> 
> "Pissavin hubert" <[EMAIL PROTECTED]> on 
> 2001-04-03 11:10:21 AM
> wrote:
> 
> > the 2 nets are connected together and Protel
> > generates an error each time we use self.
> 
> I suspect you want to use a``virtual short'' component
>   
> http://groups.yahoo.com/group/protel-users/files/protelfaq.html#short
> .
> 
> What is a ``self'' on a PWB ?
> 
> -- David Cary
> 


* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* To post a message: mailto:[EMAIL PROTECTED]
*
* To join or leave this list visit:
* http://www.techservinc.com/protelusers/subscrib.html
*                      - or email -
* mailto:[EMAIL PROTECTED]?body=leave%20proteledaforum
*
* Contact the list manager:
* mailto:[EMAIL PROTECTED]
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *

Reply via email to