I agree.
I've made many panels.
But uncheck "keep nets", otherwise Protel will draw rubber bands.
And another thing: don't repour polygons if asked!!!! The panelized Board
has different netnames and different design rules so the polygons will not
look as before.

I've also made panels with different population on the boards (for an
application where we needed some instances of the same board in one
Appliance, but with different timings). I made then one pick and place list
for the whole panel, with different values on the single boards. Works also
pretty good.

regards,

Heiko Vachek
elektronik 21 GmbH
E-Mail: [EMAIL PROTECTED]

Webseite:       http://www.elektronik21.de
 

> -----Original Message-----
> From: Dennis Saputelli [mailto:[EMAIL PROTECTED]]
> Sent: Thursday, August 16, 2001 8:57 PM
> To: Protel EDA Forum
> Subject: Re: [PEDA] Camtastic or Protel?
> 
> 
> we use protel
> use paste special on a copy of the board
> set keep nets, dupe desigs
> works pretty well
> Dennis Saputelli
> 
> 
> Tony Karavidas wrote:
> 
> > Does anyone have a good procedure for PCB panelization? 
> I've tried it in
> > Protel (99SE), and it wants to connect all the nets (which 
> I understand).
> > When I try it in Camtastic, there is a lot of router and 
> mousebite info I'd
> > like to add but it doesn't seem like a natural place to add 
> that stuff.
> >
> > I've never been requested to panalize before now. It seems messy.
> >
> > Tony
> 
> --
> ______________________________________________________________
> _____________
> www.integratedcontrolsinc.com            Integrated Controls, Inc.
>    tel: 415-647-0480                        2851 21st Street
>       fax: 415-647-3003                        San Francisco, CA 94110
> 
> 
> 

* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* To post a message: mailto:[EMAIL PROTECTED]
*
* To leave this list visit:
* http://www.techservinc.com/protelusers/leave.html
*                      - or email -
* mailto:[EMAIL PROTECTED]?body=leave%20proteledaforum
*
* Contact the list manager:
* mailto:[EMAIL PROTECTED]
*
* Browse or Search previous postings:
* http://www.mail-archive.com/proteledaforum@techservinc.com
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *

Reply via email to