This feature has helped me in seperating important nets from the "Gordian
Knot" of the remaining nets.
Sean James
PCB Designer
Telecast Fiber Systems, Inc.
102 Grove Street
Worcester, MA 01605
(TEL) 508.754.4858 x33
(FAX) 413.541.6170

----- Original Message -----
From: <[EMAIL PROTECTED]>
To: "Protel EDA Forum" <[EMAIL PROTECTED]>
Sent: Thursday, December 13, 2001 1:47 AM
Subject: Re: [PEDA] Add Colour to Nets


>
>
> I did a search on 'color'(?) in all my emails and came up with this reply
from
> Brendon Slade..
>
>
>
>
> > Hi Ian
> >
> > To change the colour of the ratsnest (ex PCAD user?) go to the "Browse
> PCB"
> > tab in the Document Manager panel.  Click on the drop down list and
select
> > "Nets".  The panel immediately below should display the loaded nets.
> Select
> > the net you wish to change the colour of and click on "Edit"
> (alternatively
> > double click on the net to edit).  A dialogue box is displayed with
Colour
> > being one of the options.  Select a colour.  I use this for power nets
and
> > particular busses and other important nets.
> >
> > Regards
> > Brendon.
>
>
>
>
>
>
>
>
> [EMAIL PROTECTED] on 12/13/2001 09:06:04 AM
>
> Please respond to "Protel EDA Forum" <[EMAIL PROTECTED]>
>
> To:   "Protel EDA Forum" <[EMAIL PROTECTED]>
> cc:    (bcc: Clive Broome/sdc)
>
> Subject:  Re: [PEDA] How to change Netlist lines back to solid lines?
>
>
>
> Further to this thread, does anyone know how to set the default color of
the
> ratsnest lines. I know how to edit them but would prefer that they came up
> with the color of my choice everytime they were created.
>
> Regards,
> Lloyd
>
> -----Original Message-----
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
> Sent: Wednesday, December 12, 2001 4:08 PM
> To: Protel EDA Forum
> Subject: Re: [PEDA] How to change Netlist lines back to solid lines?
>
>
>
>
> Sounds like the connections have been turned off. You can get them back
> again by
> doing the
> following in PCB:
>
> View -> Connections -> Show All
>
>
> This menu also has provision to hide or view individual components nets or
> global nets like power/ground.
> Its useful when placing parts to see a less cluttered ratsnest.
>
>
>
> _______________________________________________________________
>
> Clive Broome
> IDT Sydney Design Centre        Ph:         +61 2 9763 3513
> 8 Bayswater Dr, Homebush        Fax:        +61 2 9763 3409
> Sydney,  NSW, 2127              Email:[EMAIL PROTECTED]
> Australia
>
> _______________________________________________________________
>
>
>
>
>
>
>
>
>
>
> "Shuping Lew" <[EMAIL PROTECTED]> on 12/13/2001 04:06:41 AM
>
> Please respond to "Protel EDA Forum" <[EMAIL PROTECTED]>
>
> To:   "Protel EDA Forum" <[EMAIL PROTECTED]>
> cc:    (bcc: Clive Broome/sdc)
>
> Subject:  [PEDA] How to change Netlist lines back to solid lines?
>
>
>
> Hello, there, Does anybody know why my netlist on the PCB suddenly turned
> into hidden lines instead of solid lines? I did not change anything and
not
> sure how to changed them back to solid lines again. Thanks in advance.
>
> Susan Lew
> Quintron Systems, Inc
>
>
>
>
>
>
>
>
>
>
>
>
>
>


* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* To post a message: mailto:[EMAIL PROTECTED]
*
* To leave this list visit:
* http://www.techservinc.com/protelusers/leave.html
*
* Contact the list manager:
* mailto:[EMAIL PROTECTED]
*
* Forum Guidelines Rules:
* http://www.techservinc.com/protelusers/forumrules.html
*
* Browse or Search previous postings:
* http://www.mail-archive.com/proteledaforum@techservinc.com
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *

Reply via email to