>  thanks for the answer, but Edit > Select > Net > clicking on a
>  No-Net-Track got
> no effekts on my Design, huh!?! It works well when I choose an other
> net.
>  Andys way helped me to select the tracks, I had to check "same layer"
>  to
> prevent that Keepouts and Mech where chousen.
>  Gisbert, thanks for your answer, but there are nets on the components
>  I wanted
> to stay and run to the other components behind them...

Another method is to create a class of all nets (after you've 
updated the netlist). Select all tracks on top and bottom layers and 
then use the class to unselect the ones with nets, leaving the ones 
without.

Steve.

======================================================
Steve Baldwin                Electronic Product Design
TLA Microsystems Ltd         Microcontroller Specialists
PO Box 15-680, New Lynn      http://www.tla.co.nz
Auckland, New Zealand        ph  +64 9 820-2221
email: [EMAIL PROTECTED]      fax +64 9 820-1929
======================================================

* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* To post a message: mailto:[EMAIL PROTECTED]
*
* To leave this list visit:
* http://www.techservinc.com/protelusers/leave.html
*
* Contact the list manager:
* mailto:[EMAIL PROTECTED]
*
* Forum Guidelines Rules:
* http://www.techservinc.com/protelusers/forumrules.html
*
* Browse or Search previous postings:
* http://www.mail-archive.com/proteledaforum@techservinc.com
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *

Reply via email to