Hi Steve:

One way to acheive this is to place two schematic parts one over the other.
That way all the connectivity will be the same for both, and there will be
two pcb parts registered in the database. It will look ugly, though, because
all the pins will have junctions at the ends.

Cheers,
Matthew van de Werken
Electronics Engineer
CSIRO Exploration & Mining - Gravity Group
1 Technology Court - Pullenvale - Qld - 4069
ph:  (07) 3327 4685     fax:  (07) 3327 4455
email:  [EMAIL PROTECTED]


> -----Original Message-----
> From: Stephen Smith [mailto:[EMAIL PROTECTED]]
> Sent: Thursday, 20 December 2001 3:09 AM
> To: Protel EDA Forum (E-mail)
> Subject: [PEDA] Dual Footprints
> 
> 
> Is there a way to associate two separate PCB footprints to 
> one Schematic
> component, provided that all the pins match.
> I know how to do it manually within the PCB editor, but I'd 
> like to still be
> able to synchronize the PCB with the schematic.
> 
> Thanks for any help.
> 
> Steve 
> 

* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* To post a message: mailto:[EMAIL PROTECTED]
*
* To leave this list visit:
* http://www.techservinc.com/protelusers/leave.html
*
* Contact the list manager:
* mailto:[EMAIL PROTECTED]
*
* Forum Guidelines Rules:
* http://www.techservinc.com/protelusers/forumrules.html
*
* Browse or Search previous postings:
* http://www.mail-archive.com/proteledaforum@techservinc.com
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *

Reply via email to