So far I have only seen this when I have selected and moved a bunch of parts, if I then double-click the part the coordinates are all of a sudden out to 6 places. I am woring im metric but also use basic increments like 0.1mm for all grids. I pretty much do not change between units display. Robert M. Wolfe, C.I.D. [EMAIL PROTECTED]
----- Original Message ----- From: "Dan Beaudoin" <[EMAIL PROTECTED]> To: "Protel EDA Forum" <[EMAIL PROTECTED]> Sent: Tuesday, March 12, 2002 11:26 AM Subject: Re: [PEDA] Is it a bug, or me? > It's a bug. I've been having the same problem for quite a while. I think > it may happen when the grid is changed from mils to mm and then back, but > I'm not sure. > > ----- Original Message ----- > From: "Sean James" <[EMAIL PROTECTED]> > To: "Protel EDA Forum" <[EMAIL PROTECTED]> > Sent: Tuesday, March 12, 2002 8:09 AM > Subject: [PEDA] Is it a bug, or me? > > > > Why do components and their pads magically have coordinates that are > either > > xxx.999 or xxx.001? I'm working on a .5 mil grid, with a .5 mil component > > grid, and a 5 mil electrical grid. It's very aggravating. > > Sean James > > PCB Designer > > Telecast Fiber Systems > > 102 Grove Street > > Worcester, MA 01603 > > TEL 508-754-4858 x33 > > FAX 413-541-6170 > > > > > * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * To post a message: mailto:[EMAIL PROTECTED] * * To leave this list visit: * http://www.techservinc.com/protelusers/leave.html * * Contact the list manager: * mailto:[EMAIL PROTECTED] * * Forum Guidelines Rules: * http://www.techservinc.com/protelusers/forumrules.html * * Browse or Search previous postings: * http://www.mail-archive.com/proteledaforum@techservinc.com * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *