Michael,
        there is a Schematic option under Option Preferences called "Single
'\'Negation". This should be unchecked if you don't want the single negation
option to work. Unfortunately if it is checked there is no option to stop it
until the end of the string is reached.

Sincerely,
Brad Velander.

Lead PCB Designer
Norsat International Inc.
Microwave Products
Tel   (604) 292-9089 (direct line)
Fax  (604) 292-9010
email: [EMAIL PROTECTED]
http://www.norsat.com

Visit us at Booth 2G2-09 at CommunicAsia 2002 in Singapore June 18-21.


> -----Original Message-----
> From: Watnoski, Michael [mailto:[EMAIL PROTECTED]]
> Sent: Monday, April 29, 2002 2:23 PM
> To: 'Protel EDA Forum'
> Subject: [PEDA] Barred (active low) text
> 
> 
> Help!!
> 
>       Can anyone explain the logic to placing the bar over 
> text in the pin
> name.  It does not seem to be consistent.  The backslash '\' character
> sometimes will bar everything following it, and other times 
> it seems to only
> affect the character immediately preceding it.  When it used 
> as the first
> character, there appears to be no way to toggle it off before 
> the end of the
> pin name.  The help file has no clues to this problem.  Thanks.
> 
> Michael

* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* To post a message: mailto:[EMAIL PROTECTED]
*
* To leave this list visit:
* http://www.techservinc.com/protelusers/leave.html
*
* Contact the list manager:
* mailto:[EMAIL PROTECTED]
*
* Forum Guidelines Rules:
* http://www.techservinc.com/protelusers/forumrules.html
*
* Browse or Search previous postings:
* http://www.mail-archive.com/proteledaforum@techservinc.com
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *

Reply via email to