> I can confirm what Dennis knows.
> Protel exports the SDT version of a schematic, but not the SDT
> library/symbols required by Capture v7.2 and above to 
> translate the SDT
> version.  The issue of correctly modifying the "SDT.cfg" 
> file, required to
> up-rev an SDT design to v7.2 and above, is moot without the SDT
> library/symbols.

You can generate the Orcad .olb library. 

But its not straight forward. 

You can generate a .olb lib from P98, so you need to save your P99 project back into 
P98 then save as SDT SCH & OLB, amend the .cfg file then import into Orcad.

I was always pretty disappointed that the support was removed in P99SE, but you can 
see how its better for Protel if Import is OK, but export is more difficult ....... as 
Capture is a nice environment (but myself & Layout will never be friends).

Best Regards

John A. Ross

RSD Communications Ltd
8 BorrowMeadow Road
Springkerse Industrial Estate
Stirling, Scotland FK7 7UW

Tel     +44 [0]1786 450572 Ext 225 (Office)
Tel     +44 [0]1786 450572 Ext 248 (Lab)
Fax     +44 [0]1786 474653
GSM     +44 [0]7831 373727

Email   [EMAIL PROTECTED]
WWW     http://www.rsd-communications.co.uk


************************************************************************
* Tracking #: 02A61E2A18DAE548A0CBABD861A5ADAA1B8498AA
*
************************************************************************

* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* To post a message: mailto:[EMAIL PROTECTED]
*
* To leave this list visit:
* http://www.techservinc.com/protelusers/leave.html
*
* Contact the list manager:
* mailto:[EMAIL PROTECTED]
*
* Forum Guidelines Rules:
* http://www.techservinc.com/protelusers/forumrules.html
*
* Browse or Search previous postings:
* http://www.mail-archive.com/proteledaforum@techservinc.com
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *

Reply via email to