Paul

Try enabling one of 'Include Top-side', 'Include Bottom-side' or 'include 
Double-sided' in Properties->Components of your .ppc file.

Igor

-----Original Message-----
From: Paul Gaastra [mailto:[EMAIL PROTECTED]]
Sent: Thursday, 18 July 2002 1:41 PM
To: Protel EDA Forum
Subject: [PEDA] PPC missing Component Pads on bottom layer


Sorry I have to relearn Protel 99 every time I use it.

I'm trying to get a power printout and I can't get the pads of
components to show up on the bottom layer.  The free pads like vias and
those pads that I put in as pads show up.  The pads in the components
I'm using are multilayer.  I've set all the things in Multilayer>Layer
Properties>Component primitves to "Full" and I've done the rebuild. 
What else is there left to try?

Paul Gaastra      email: [EMAIL PROTECTED]
BioEngineering Technologies, HortResearch 
Private Bag 3123                  phone +64 7 8584745    
Hamilton, NEW ZEALAND         fax +64 7 8584705


______________________________________________________
The contents of this e-mail are privileged and/or confidential to the
named recipient and are not to be used by any other person and/or
organisation. If you have received this e-mail in error, please notify 
the sender and delete all material pertaining to this e-mail.
______________________________________________________

************************************************************************
* Tracking #: DA1D486F35F27B41846A18217E00FBAED5E2D403
*
************************************************************************

* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* To post a message: mailto:[EMAIL PROTECTED]
*
* To leave this list visit:
* http://www.techservinc.com/protelusers/leave.html
*
* Contact the list manager:
* mailto:[EMAIL PROTECTED]
*
* Forum Guidelines Rules:
* http://www.techservinc.com/protelusers/forumrules.html
*
* Browse or Search previous postings:
* http://www.mail-archive.com/proteledaforum@techservinc.com
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *

Reply via email to