Don't know. That's exactly what you're "supposed" to do to get those pads to
show up.

Maybe your configuration is hosed like a couple other people have been
reporting on this list????



> -----Original Message-----
> From: Paul Gaastra [mailto:[EMAIL PROTECTED]]
> Sent: Wednesday, July 17, 2002 8:41 PM
> To: Protel EDA Forum
> Subject: [PEDA] PPC missing Component Pads on bottom layer
>
>
> Sorry I have to relearn Protel 99 every time I use it.
>
> I'm trying to get a power printout and I can't get the pads of
> components to show up on the bottom layer.  The free pads like vias and
> those pads that I put in as pads show up.  The pads in the components
> I'm using are multilayer.  I've set all the things in Multilayer>Layer
> Properties>Component primitves to "Full" and I've done the rebuild.
> What else is there left to try?
>
> Paul Gaastra      email: [EMAIL PROTECTED]
> BioEngineering Technologies, HortResearch
> Private Bag 3123                  phone +64 7 8584745
> Hamilton, NEW ZEALAND         fax +64 7 8584705
>
>
> ______________________________________________________
> The contents of this e-mail are privileged and/or confidential to the
> named recipient and are not to be used by any other person and/or
> organisation. If you have received this e-mail in error, please notify
> the sender and delete all material pertaining to this e-mail.
> ______________________________________________________
>
> ************************************************************************
> * Tracking #: DA1D486F35F27B41846A18217E00FBAED5E2D403
> *
> ************************************************************************
>
>

* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* To post a message: mailto:[EMAIL PROTECTED]
*
* To leave this list visit:
* http://www.techservinc.com/protelusers/leave.html
*
* Contact the list manager:
* mailto:[EMAIL PROTECTED]
*
* Forum Guidelines Rules:
* http://www.techservinc.com/protelusers/forumrules.html
*
* Browse or Search previous postings:
* http://www.mail-archive.com/proteledaforum@techservinc.com
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *

Reply via email to