yep we do . HP500 - 42 inch wide with HPGL card built in. we connect it directly to a parallel or USB port and it works fine.with 99 and 99se
To use it on a network you must use the HP j4169A card to plug in into it and add 128 megs of ram to it. Do NOT use those thingies like netgear print spooler etc. That will fail !. The plotter needs a bidirectional interface for control and thos e boces can't handle that. ************************************************************************ * Tracking #: FD3A215AC5C20543ACA0391830E393267AA79A90 * ************************************************************************ -- -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- _____________ /____________/ Vincent Himpe // _____ ___/ Lab Manager / \ \ / / / ST Microelectronics /___\ \ / / / 5510 Six Forks Road . Suite 200 /______//_/__/ Raleigh NC 27612 Tel : (919) 850 6070 Fax : (919) 850 6689 e-mail : [EMAIL PROTECTED] -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * To post a message: mailto:[EMAIL PROTECTED] * * To leave this list visit: * http://www.techservinc.com/protelusers/leave.html * * Contact the list manager: * mailto:[EMAIL PROTECTED] * * Forum Guidelines Rules: * http://www.techservinc.com/protelusers/forumrules.html * * Browse or Search previous postings: * http://www.mail-archive.com/proteledaforum@techservinc.com * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *