Thanks, JaMi

----- Original Message -----
From: "Rene Tschaggelar" <[EMAIL PROTECTED]>
To: "Protel EDA Forum" <[EMAIL PROTECTED]>
Sent: Saturday, October 26, 2002 1:51 AM
Subject: Re: [PEDA] SDK and Delphi Questions


> Well,
> I'm no expert in the Protel Servers, but in Delphi.
> Unless you want to commercialize your product, the Delphi7 personal
> seems to suite. The next step, Delphi7 professional includes the
> source of many libraries, plus allows you to commercialize your work.
> The upgrades require a Delphi 6 of the same level, I think.
> For more info : http://www.borland.com/delphi/index.html
>
> I didn't follow the PDEV group, just noticed that the conditions to
> get all the information and the conditions to work under, ahem: the NDA,
> are not that motivating.
>
> Rene
>
>
> JaMi Smith wrote:
> >
> > Earth to PEDA!
> >
> > Earth to PEDA!
> >
> > Either I am lost in space, which is quite possible, or the PEDA List
Server
> > is.
> >
> > I sent the following post to the PEDA Forum, and was supprised to not
get
> > any replies.
> >
> > Then I noticed that the list seems to have slown down to a crawl, with
only
> > a very few posts showing up, and I thought my ISP must have lost all of
my
> > mail again (which they do on a regular basis), so I logged onto Yahoo!
> > Groups and checked the PEDA Archive, and lo and behold, it only shows
> > postings up to October 17th.
> >
> > Has the world come to an end?
> >
> > Did I miss the meltdown?
> >
> > Anyway, I am reposting this in hope that I can get some responses.
> >
> > Thanks,
> >
> > JaMi
> >
> > ----- Original Message -----
> > From: "JaMi Smith" <[EMAIL PROTECTED]>
> > To: "Protel EDA Forum" <[EMAIL PROTECTED]>
> > Cc: "JaMi Smith" <[EMAIL PROTECTED]>
> > Sent: Monday, October 21, 2002 8:02 AM
> > Subject: [PEDA] SDK and Delphi Questions
> >
> > So now that I am actually seriously thinking about tinkering aroud with
the
> > Protel 99 SE SDK, I guess it is time go out and buy some version of
Borland
> > Delphi, which I understand is necessary to use the SDK.
> >
> > What is Borland Delphi? I asked one person and they told me it was "kind
of
> > like Visual Basic". I am totally clueless on this one (and a few other
> > things), so any help in attempting to get started here would be greatly
> > appreciated.
> >
> > OK, so I do a search on Borland Delphi on the net, and I come up with at
> > many different versions and with prices all over the map:
> >
> > Delphi 7 Studio Professional Upgrade - $289
> >
> > Delphi 7 Studio Professional Academic - $96
> >
> > Delphi 7 Studio Enterprise Upgrade - $1569
> >
> > Delphi 7 Studio Enterprise New User - $2700
> >
> > Delphi Studio Professional 7 Full Product - $893
> >
> > Delphi 7 Personal Full Product - $87
> >
> > Delphi Studio 7 Academic - $389
> >
> > Needless to say, I don't want to buy more than I need, and at the same
time
> > I certainly don't want to go out and buy something that is not going to
do
> > the job.
> >
> > I even have a question in my mind as to whether or not the SDK modules
might
> > be designed for and work better with an older version of the product, as
I
> > have run into this sort of thing before. Should I be looking for version
5
> > on Ebay or something?
> >
> > On the other hand, does anyone have any idea what I will need for the
DXP
> > SDK if and when it ever shows up? According to Murphy's Law it will
probably
> > be different.
> >
> > Thanks,
> >
> > JaMi Smith
>
> --
> Ing.Buero R.Tschaggelar - http://www.ibrtses.com
> & commercial newsgroups - http://www.talkto.net

* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* To post a message: mailto:proteledaforum@;techservinc.com
*
* To leave this list visit:
* http://www.techservinc.com/protelusers/leave.html
*
* Contact the list manager:
* mailto:ForumAdministrator@;TechServInc.com
*
* Forum Guidelines Rules:
* http://www.techservinc.com/protelusers/forumrules.html
*
* Browse or Search previous postings:
* http://www.mail-archive.com/proteledaforum@;techservinc.com
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *

Reply via email to