what about the infamous runaway panning problem ? is that finally nailed in DXP?
Dennis Saputelli Tony Karavidas wrote: > > Dimensioning is one area that is really improved in DXP. You can specify > mm, cm, mils, inches, precision, and they attach to objects so when you > move the object (mounting hole for example) the dimensions adjust > automatically. It's much better than 99SE > > Check out the demo if you have time. > > > -----Original Message----- > > From: Andy Gulliver [mailto:[EMAIL PROTECTED]] > > Sent: Friday, December 13, 2002 9:09 AM > > To: Protel EDA Forum > > Subject: Re: [PEDA] Protel Dimensions > > > > > > You can get mm by changing to metric, or else there's the > > option to 'explode dimension to primitives' after which you > > can edit the text as a string to whatever you like - although > > that method is a bit messy, and a pain if you then need to > > change the dimension. > > > > Regards, > > > > Andy Gulliver > > > > > -----Original Message----- > > > From: Michael Biggs [mailto:[EMAIL PROTECTED]] > > > Sent: 13 December 2002 16:37 > > > To: 'Protel EDA Forum' > > > Subject: [PEDA] Protel Dimensions > > > > > > > > > What are the options in Protel99SE for dimension information. Mine > > > uses the measurement in (mil). Is there a way to change this to see > > > (INCH) or anything else? > > > Thanks for any help > > > > > -- ___________________________________________________________________________ www.integratedcontrolsinc.com Integrated Controls, Inc. tel: 415-647-0480 2851 21st Street fax: 415-647-3003 San Francisco, CA 94110 * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * To post a message: mailto:[EMAIL PROTECTED] * * To leave this list visit: * http://www.techservinc.com/protelusers/leave.html * * Contact the list manager: * mailto:[EMAIL PROTECTED] * * Forum Guidelines Rules: * http://www.techservinc.com/protelusers/forumrules.html * * Browse or Search previous postings: * http://www.mail-archive.com/proteledaforum@techservinc.com * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
