I've never had problems with the transformer models that come with 99se - I use them all the time.
(ok, that's not exactly true, they can be a pig, but do work if you use them right.) I usually use the dual primary, dual secondary and join the middles together. or you can use two separate transformers and put a (.K) I think somewhere in the drawing as text to indicate a coupling coefficient between the transformers. Jason. -----Original Message----- From: Dennis Gibson [mailto:[EMAIL PROTECTED] Sent: 02 April 2003 03:33 To: Protel Tech Subject: [PEDA] Transformers G'day, Does anyone have a Protel Spice model of a transformer with a centre tapped primary? The models that come with 99SE have errors and are not bidirectional. Thanks, DG -- ____________________________________________________ Dennis Gibson, Electronics Unit Research School of Physical Sciences & Engineering Australian National University, Canberra, ACT 0200 Australia Ph: (02) 6125 2607 [Intl: +61 2 6125 2607] Fx: (02) 6125 4433 [Intl: +61 2 6125 4433] Email: [EMAIL PROTECTED] (VK1DG) ____________________________________________________ * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * To post a message: mailto:[EMAIL PROTECTED] * * To leave this list visit: * http://www.techservinc.com/protelusers/leave.html * * Contact the list manager: * mailto:[EMAIL PROTECTED] * * Forum Guidelines Rules: * http://www.techservinc.com/protelusers/forumrules.html * * Browse or Search previous postings: * http://www.mail-archive.com/[EMAIL PROTECTED] * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
