the spectraa router?
as far as i know it always comes back w/ 28 holes
pretty easy to fix if you don't forget, but somewhat bush league

the 99SE router only uses the board via and i haven't seen it trash the
hole size
there are 3 candidates for sizes for a given type have you checked all 3
size pairs?

mike i think has said this is fixed in P2004 re spectraa

Dennis Saputelli

Ray Mitchell wrote:
> 
> Hello,
> 
> In my design rules I've specified that all routing vias are to be 20mil
> diameter with a 10mil hole.  However, the router makes them all 20mil
> diameter with a 28mil hole.  Nice feature!  I know it hasn't always done
> this - only sometimes.  I only have one design rule for routing via
> style.  Its scope is "Board" and it is enabled.  Am I holding my mouth
> right for some routes and wrong for others?
> 
> Ray
> 
> Ray Mitchell
> Engineer, Code 2732
> SPAWAR Systems Center
> San Diego, CA. 92152
> (619)553-5344
> [EMAIL PROTECTED]
> 

-- 
_______________________________________________________________________
Integrated Controls, Inc.           Tel: 415-647-0480  EXT 107 
2851 21st Street                    Fax: 415-647-3003
San Francisco, CA 94110             www.integratedcontrolsinc.com


* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* To post a message: mailto:[EMAIL PROTECTED]
*
* To leave this list visit:
* http://www.techservinc.com/protelusers/leave.html
*
* Contact the list manager:
* mailto:[EMAIL PROTECTED]
*
* Forum Guidelines Rules:
* http://www.techservinc.com/protelusers/forumrules.html
*
* Browse or Search previous postings:
* http://www.mail-archive.com/[EMAIL PROTECTED]
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *

Reply via email to