Hi, 

I am not able to program the LPC2378. I have connected the programming jumper, 
and other connections are all fine. This is what I get after I try to program 
the LPC: 

pinjalan@mydomain:~$ /opt/isp/lpc21isp -hex -wipe -control -verify -PHILIPSARM 
can_a_bus.hex /dev/ttyUSB0 38400 12000
Verify after copy RAM to Flash.
Target: Philips.
lpc21isp version 1.81
Can't open file can_a_bus.hex

But if I run a test command I get an OK result. 

pinjalan@mydomain:/dev$ /opt/isp/lpc21isp -detectonly -control foo /dev/ttyUSB0 
115200 14746
lpc21isp version 1.81
Synchronizing (ESC to abort). OK
Read bootcode version: 3
3
Read part ID: LPC2378, 512 kiB ROM / 58 kiB SRAM (0x1700FD25)

What do I do ?

Thanks,
Naga.
_______________________________________________
psas-avionics mailing list
psas-avionics@lists.psas.pdx.edu
http://lists.psas.pdx.edu/mailman/listinfo/psas-avionics

Reply via email to